Netbotz Devices host Template

lmorair · Joined: 05 Jan 2005 Posts: 3

Hello again,
To complete my former post (Uptime Devices Host Template) , we also have a Netbotz 300B in one of our locations.
Thanks to that device, we monitor the air flow, humidity, temperature and have a camera there. The problem is that the device has a very good interface but a poor SNMP implementation (MIBs are included) allowing us to monitor it, but not through an indexed SNMP query

.
As we have only three things to monitor, it is not a big deal, so here you will find the host template, exported with "dependencies".
Please feel free to send me any feedback or comments!
Regards,
Lmorair

kurgoth · Joined: 09 Apr 2004 Posts: 12

I keep getting an error when trying to look at this template. Any suggestions?

JBs · Joined: 23 Oct 2004 Posts: 11

Not 100% sure but this template has been designed for cacti 0.8.6b. Maybe this is a version connflict?

TheWitness · Posted: Tue Jan 11, 2005 7:37 pm Post subject:

Templates are not currently version portable. To import a Template from a 0.8.6c system, it must have been exported on one.

TheWitness

jtnfoley · Joined: 15 Aug 2006 Posts: 5 Location: MA, USA

What are the odds that somebody's already got this ported to Version 0.8.6h?

shanekennedy · Joined: 10 Oct 2006 Posts: 18

this query should work for version H

snmpget -v1 -c adllc <hostname> .1.3.6.1.4.1.5528.30.10.1.0 .1.3.6.1.4.1.5528.30.10.2.0 | awk 'BEGIN{ RS = "" }{print "temp:"$4" humd:"$8}'

mrjibbles · Joined: 07 Dec 2006 Posts: 7

HI,
Has anyone got this working on i release?
Getting XML parse errors on importing.
Cheers

yetdog · Joined: 08 Aug 2005 Posts: 20

Anyone have this for the i version of Cacti?

aleto · Joined: 25 May 2005 Posts: 38

Anyone got this working for latest cacti yet?

Splash · Joined: 07 Nov 2007 Posts: 2

I have a NetBotz 520 and using Cacti 0.8.7 I was able to import the NetBotz templates with no problem. To get it to graph however I had to change the OID strings in the Data Templates with the data below. I still can't find the threshold values, once I do I will post them. I also picked up that even though I specified a RO SNMP community, it stuck to the default "public".

Temp: .1.3.6.1.4.1.5528.100.4.1.1.1.8.21604919
Humidity: .1.3.6.1.4.1.5528.100.4.1.2.1.7.20490798
AirFlow: .1.3.6.1.4.1.5528.100.4.1.5.1.8.18717296

ebjers · Joined: 09 Jul 2007 Posts: 3

you may need to remove the degree symbol � from the xml code before inporting into Cacti

guanno · Joined: 27 Aug 2007 Posts: 36

Here is an updated template for a Netbotz 420 using (F) Degrees.
The OID's are different than the 520.
Using 8.7a