[XML] Cisco NBAR Protocol Statistics Query 1.2a [UPDATED]

roddie · Last edited by roddie on Tue Jun 14, 2005 2:16 pm; edited 1 time in total

All,

Larry was gracious enough to work with me yesterday to fix-up the script server version of the original eatworms NBAR script (with kingaru's bug-fix).

I've attached the modified script along with the templates that I updated to work with the new script. The readme.txt file has also been updated to reflect the changes and new instructions.

Please post any questions here.

Thanks again to Larry for all of the help and to kingaru (Igor) for his fixes!

Regards,
Roddie

Edit: The original version that I posted didn't work properly with the script server. I learned enough PHP to fix it, I think, but I'd appreciate some feedback.

chloe · Joined: 13 Jun 2005 Posts: 17

I have always a problem !!
on my environment PC if I make the following command-line under dos:
snmpwalk -v1 -c caat 125.65.100.2 1.3.6.1.4.1.9.9.244.1.2.1.1.2

I have a reponse

chloe · Joined: 13 Jun 2005 Posts: 17

in the command-line snmpwalk If I no specifie not no the version snmp used.

snmpwalk -c xxx @IP 1.3.6.1.4.1.9.9.244.1.2.1.1.2
snmpwalk: No securityName specified

I have an error message

roddie · Posted: Tue Jun 14, 2005 9:46 am Post subject:

snmpwalk defaults to whatever version it was compiled with, I believe.

Is there a reason you can't force it to 1 for your query?

chloe · Joined: 13 Jun 2005 Posts: 17

How to force the requet snmp and or force it

chloe · Joined: 13 Jun 2005 Posts: 17

Nevertheless i Choose the SNMP version equal 1 for my router nbar in the SNMP Options of devices

chloe · Joined: 13 Jun 2005 Posts: 17

chloe · Joined: 13 Jun 2005 Posts: 17

The script SS puts a lot of time to discovery protocols and interfaces tag

chloe · Joined: 13 Jun 2005 Posts: 17

Hy roddie
please help me for resolve my problem.
teh script don't work.
i graph any protocol in this graph
please SOS

roddie · Posted: Wed Jun 15, 2005 3:34 pm Post subject:

Chloe,

I can't help you unless you give me some information.

What's not working? Do queries work? How are you trying to use it?

Etc.

chloe · Joined: 13 Jun 2005 Posts: 17

roddie
i have installed a script but in version 1.2.
i don't monitore this ressources

I hope that it is going to go to you to understand my problem

chloe · Joined: 13 Jun 2005 Posts: 17

roddie
what do you need exactly to be able to help me
It is sufficient the images above

kingaru · Cacti User Joined: 09 Mar 2005 Posts: 54

1. Not evry IOS supports SNMP NBAR MIBS. This means if you have enabled ip nbar in the configuration it does not mean that it will enable your SNMP based NBAR monitoring. For instance Cisco 3620 does not have this options at all the old 26xx do have but in IP PLUS/ENTERPRISE BASIC featuire set base IOSes and dont have in the IP SEC/3DES/FW based images. Refer to the Cisco web site in otder to make sure that your IOS does support NBAR over SNMP.
2. Just a general advice .. when you post screeens it is advisable to remove community strings and IP addresses of your routers. I hope that nobody still broke in to your router

I hope it explains
Igor

chloe · Joined: 13 Jun 2005 Posts: 17

Nevertheless since my console dos of the pc, the router re-lays me in a snmpwalk of the feature to nbar.
my version of IOS is 12.3(14)T2 ip base on the router C3745

chloe · Joined: 13 Jun 2005 Posts: 17

kingaru i have one question for you :

my IOS it is compatible with fonctionnality NBAR over snmp

my IOS is c3745-ipbase-mz[1].123-14.T2.bin

What do you think about it ?