Cisco 4506 and 4510 not returning MAC's

Dwayne_Dibbley · Joined: 18 Sep 2005 Posts: 46

I have configured 6513 running CatOS with 6000 MSFC's and theses are returning data correctly, but when i add the 4500 as switch/hub or switch/router using scanIOS or scan CatOS i only get back the trunk port to another cat and no user ports ie 4 x 4248 cards only the ten gig interface?

Thanks

TheWitness · Posted: Thu May 29, 2008 8:43 pm Post subject:

Looks to me that the scanning functions needs some updates for this Level3 switch, or you have an ACL that is preventing read access to the CAM/BRIDGE information. Please verify.

Cisco supports restricting access to the CAM information on all their switches. Other than that, I am a bit remiss since I don't do this work any more and don't have time to sub-contract myself to keep things up-to-date.

We'll see. Money always talks... Especially if your CO. has some and doesn't mind sending changes upstream.

TheWitness

Dwayne_Dibbley · Joined: 18 Sep 2005 Posts: 46

OK here you go for starters

There are no ACL restricting access to the CAM/BRIDGE info?

can i SNMP walk the bridge info to see if its returning the correct data?