Liebert GXT UPS

Ragnar · Joined: 04 Aug 2005 Posts: 5

Only supports single input/output Liebert UPSs, tested on a GXT2U with SNMP (not OCWEBCARD- but it should work on that as well).

I recommend setting your SNMP timeout higher than 500 (mine's set to 5000) since the cards have a tendancy to be slow to respond when you hammer them with requests.

Contains:
1 Host template - Liebert UPS
4 Graph templates - Battery, Input, Output, Output Watts
9 Data templates

axelilly · Joined: 04 Aug 2005 Posts: 27

Nice template.

However I have a Liebert nFinity UPS. The OIDs you used are not found on our UPS. The nFinity must have different MIBS. I'm currently looking for them to see if I can just update the OIDs that you used but keep your templates.

jeffmeden · Joined: 10 Mar 2004 Posts: 14 Location: Columbus, OH

This template works with GXT2U and Nfinity UPS' with the newest (OCWEB) card.

Here is my save of your template, corrected to work with a GXT2U and the current network card. I have never worked with templates like this before so if anyone can test it and provide feedback that would be great.

edit/update: I changed the naming on the template so it will allow for multiple types of liebert UPSs.

Another edit/update: I altered the limits, which were the only things stopping this from working with a Nfinity (since the voltages are much higher).

If anyone is using this template, i would love to hear from you.

dorje · Posted: Mon Jun 12, 2006 11:20 pm Post subject: Modifed - environment temp added

I've modified the cacti_host_template_liebert_ocweb.xml to include
- Overview graph of temp / batt time at current load / output load
- Temp graph

Got the TEMP OID here
http://support.ipmonitor.com/mibs/LIEBERT-GP-ENVIRONMENTAL-MIB/tree.aspx
Great resource

This is up and monitoring a Liebert NX40 ups

All Temps are in degrees Celcius (NOTE there is a degrees Fahrenheit OID)

Thanks to jeffmeden for the orignal

keymaker · Joined: 12 Jul 2006 Posts: 1 Location: Toronto, ON

Works great with a GXT2U 2000VA. I had to bump the "run time remaining" since with 4 external batteries I have about 7000 minutes at no load

asjl · Joined: 10 Aug 2006 Posts: 2 Location: Aotearoa

I tried importing the various Liebert templates posted by ragnar, jeffmeden and dorje but I got this:

Error: XML: Hash version does not exist.

Any pointers appreciated

rony · Posted: Thu Aug 24, 2006 7:53 pm Post subject:

The template is created in a newer version of Cacti than you are using.

carlo · Joined: 11 Sep 2006 Posts: 7

has anyone gotten this working in an NX40? I loaded the templates but dont get any data (except temprature).

I used a mib tool and I verified the templates are correct as the values are graphable from solarwinds.

anyone??

EDIT: Okay saw that the last template is for a NX40

what firmware is your OCEWEB card running.

EDIT: Okay figured it out. I added a "." (ie. full stop) before the OID and they all started working. I also had to adjust the graph scales as the default was 500 but my battery voltage for example is 577.

unc-newbie · Joined: 08 Mar 2007 Posts: 1

I found out that the Fahrenheit MIB is .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3.1 and so i had already imported the template. So i just went into the cacti templates and changed the references to Celsius to Fahrenheit and then went and changed to OID to the correct one. Did a delete from all the data and recreated the graphs but it is not graphing the Fahrenheit. Any ideas.