[XML] Cisco NBAR Protocol Statistics Query 1.2a [UPDATED]

[roddie]

I have the same issue - I'm not too graph template savvy, but I'll poke around and try to figure out why. It seems like some kind of a scaling issue.

[zoltar]

Im not using this template (QOS MIB fits me better), but I think you should check if turn bytes into bits is selected for CDEF function in template for each graph item bound to output field.

[Linegod]

I keep getting this:

[Linegod]

Hmm... maybe I should have more coffee, or less.

The script tests out from the console, as per the script server test, so it is passing the correct values, its just the script server dying for some reason....

[TheWitness]

What about Cactid 0.8.6f? Could also be a timeout. Goto Settings->Poller and increase your Script Timeout value.

Larry

[Linegod]

Using cactid086f-rc12 and timeout is set to 300.

On full debug it gives me this:

[Linegod]

My bad. It was a path issue

It is quick though. 128secs on old style, 94secs with script_server.

[johndoe123]

I can't get this to work. I can snmpwalk the oid in this thread and it returns all the protocols fine. Here is the debug information. IT says 0 sources found.

Data Query Debug Information

+ Running data query [10].
+ Found type = '6 '[script query].
+ Found data query XML file at '/var/www/cacti/resource/script_server/cisco_nbar_all.xml'
+ XML file parsed ok.
+ Executing script for list of indexes '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php awfeawef.com dfewa 2 index'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php fewafwea.com fewa 2 query index'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php fewafw.com fewa 2 query ifName'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php fewafwe.com faew 2 query ifType'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php fweafawe.com fwea 2 query ifAdminStatus'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php feawfwa.com feawf 2 query ifOperStatus'
+ Executing script query '/usr/bin/php -q /var/www/cacti/scripts/ss_nbar_all.php fewfaw.com fewafwae 2 query protoname'
+ Found data query XML file at '/var/www/cacti/resource/script_server/cisco_nbar_all.xml'
+ Found data query XML file at '/var/www/cacti/resource/script_server/cisco_nbar_all.xml'
+ Found data query XML file at '/var/www/cacti/resource/script_server/cisco_nbar_all.xml'

[Erik.H]

To all those with scale issues on the stacked data I made a graph template to fix that. Just import and use this one. I didn't include the min, max and average data, seeing as how I don't need data like that, I just need to know approx values.

[fmangeant]

[Erik.H]

did you install the scripts on the first page of this thread?

[mseba]

I have (when use import)

Error: XML: Hash version does not exist.

What is it ?

[aestevez]

Error: XML: Cacti version does not exist.

Why???? ¿ Por qué ?

[boots]

Hi all,

I have been trying to get this script going with not much success.

I am running Win2K3, IIS5, PHP 4.3.9, Cacti 8.6g and Cactid 8.6f

I have confirmed my router is the correct IOS version for SNMP and have a successfull response to the snmpwalk;

C:\XXXXXX\cacti-0.8.6g\scripts>snmpwalk -v1 -c XXXX XX.XX.XX.XX 1.3.6.1.4.1.9.244.1.2.1.1.2
iso.3.6.1.4.1.9.9.244.1.2.1.1.2.4.1 = STRING: "ftp"
iso.3.6.1.4.1.9.9.244.1.2.1.1.2.4.2 = STRING: "http"
iso.3.6.1.4.1.9.9.244.1.2.1.1.2.4.3 = STRING: "egp"
iso.3.6.1.4.1.9.9.244.1.2.1.1.2.4.4 = STRING: "gre"
iso.3.6.1.4.1.9.9.244.1.2.1.1.2.4.5 = STRING: "icmp"
and so on.....

I can also manually run the ss_nbar_all.php script from the command line and receive the indexs back;

C:\XXX\cacti-0.8.6g\scripts>php ss_nbar_all.php XXX.XX.XXX.X XXXX 1
Content-type: text/html X-Powered-By: PHP/4.3.9

2049
2050
2051
2052
2053
2054
2055
and so on,

I have added the . in front of the OIDs throughout the script as well as increasing PHP max execution time beyond 300 as recommended in the forum.

When I add a device to use this template, I eventually get a CGI timeout and when I close the browser and log back in, the device has been added against this template. When I view the device, the data query has no items and rows. When I run a verbose query the browser eventually times out.

When I run a debug, I cant find this host in the debug log.

Any ideas?

Thanks

Steve

[cwahlin]

I'm not getting any rrd files. I'm not seeing any actions related to nbar in the poller cache. Query works fine, but I am not seeing anything related to nbar and this host in the log (running debug).

Any ideas?

/Carl