|
|
| Author |
Message |
omen1000
Joined: 02 Mar 2005
Posts: 7
|
 Posted: Tue Mar 22, 2005 2:47 pm Post subject: Extreme Networks Host Template |
 |
|
I have a ton of Extreme Network devices on my network... I started to create a host template for them. Currently I have the CPU load % and Internal Temperature running.
I will be adding more eventually.
Feedback is appreciated.
| Description: |
| Extreme Networks Host Template XML |
|
Download |
| Filename: |
cacti_host_template_extreme_networks.xml |
| Filesize: |
15.28 KB |
| Downloaded: |
2658 Time(s) |
|
|
| Back to top |
|
 |
boots
Joined: 07 Jan 2004
Posts: 49
Location: Melbourne Australia
|
| Posted: Sat Aug 13, 2005 11:13 pm Post subject: |
|
|
HI Omen1000,
I've done the same, but you will find mostly anything else a bit painfull.
I wanted to monitor process CPU utilisation, like tBGTask and tNetTask and the MIB is supposed to support the readable Task Name however that doesnt work, and despite asking for this to be supported 6 months ago, it still doesnt work on 7.3.2.3 on a Black Diamond. Also, the Task ID and Task PC are unique per chassis....I couldnt find any Layer2 or Layer3 counters of interest in the MIB, though the CLI shows what I'm after...
Good luck!!
|
|
| Back to top |
|
|
omen1000
Joined: 02 Mar 2005
Posts: 7
|
| Posted: Sun Aug 14, 2005 9:43 am Post subject: |
|
|
| boots wrote: | HI Omen1000,
I've done the same, but you will find mostly anything else a bit painfull.
I wanted to monitor process CPU utilisation, like tBGTask and tNetTask and the MIB is supposed to support the readable Task Name however that doesnt work, and despite asking for this to be supported 6 months ago, it still doesnt work on 7.3.2.3 on a Black Diamond. Also, the Task ID and Task PC are unique per chassis....I couldnt find any Layer2 or Layer3 counters of interest in the MIB, though the CLI shows what I'm after...
Good luck!! |
Yup... same problem here... I wonder how it will all change with SNMPv3 and the XOS code... I only have 1 router running XOS, and I have not had time to play with the MIBs for it...
|
|
| Back to top |
|
|
boots
Joined: 07 Jan 2004
Posts: 49
Location: Melbourne Australia
|
| Posted: Sun Aug 14, 2005 5:55 pm Post subject: |
|
|
I had complained to Extreme about this and I was told it would be a feature request in later releases. Thats the last I heard from them about it....
I might go ahead and use the Task ID anyway, as its good to keep an eye on a few of those process's...You would expect Epicentre would do that...
|
|
| Back to top |
|
|
omen1000
Joined: 02 Mar 2005
Posts: 7
|
| Posted: Fri Sep 23, 2005 10:49 pm Post subject: |
|
|
| boots wrote: | I had complained to Extreme about this and I was told it would be a feature request in later releases. Thats the last I heard from them about it....
I might go ahead and use the Task ID anyway, as its good to keep an eye on a few of those process's...You would expect Epicentre would do that... |
You would think so...
I did a few quick and ditry perl telnets, pushes commands, captures, exits crap back a few years ago... it worked okay as long as you didn't mind seeing the stuff in the logs.
I have been asking Extreme to enable a CORRECTLY WORKING layer 4 redirect (session hijack) for the NetLogon feature to no avail. I asked that the day after they made NetLogon available... still no show.
- Omen1000
|
|
| Back to top |
|
|
cm
Joined: 15 Nov 2005
Posts: 1
|
| Posted: Tue Nov 15, 2005 6:35 am Post subject: |
|
|
Sorry to drag this up again, but I'm using your template to graph cpu stats on an Alpine (3804), however when using it on a Summit48 - it doesn't want to work, I just get 'nan' readings.. is there some issue with this that I'm overlooking?
Thanks
|
|
| Back to top |
|
|
boots
Joined: 07 Jan 2004
Posts: 49
Location: Melbourne Australia
|
| Posted: Wed Feb 08, 2006 10:49 pm Post subject: |
|
|
Hey Omen,
Finally got L2 Stats per VLAN working and Process CPU utilisation. I just need to figure out how to configure a CDEF to convert the decimal process name obtained from SNMP and convert that to HEX so we know what process name we are looking at when we run "top". Unfortunately Extreme have not fixed the bug which prevents getting the meaningful name.
Cheers
Boots
|
|
| Back to top |
|
|
boots
Joined: 07 Jan 2004
Posts: 49
Location: Melbourne Australia
|
| Posted: Wed Feb 08, 2006 11:01 pm Post subject: |
|
|
Here is one of my layer 2 VLAN stats and tBGTask on a BlackDiamond running 7.4.2.6.
The tBGTask Task ID name on the graph is the decimal equivalent of the hex address shown from a "top".
| Description: |
|
| Filesize: |
39.39 KB |
| Viewed: |
16451 Time(s) |
|
| Description: |
|
| Filesize: |
49.33 KB |
| Viewed: |
16451 Time(s) |
|
|
|
| Back to top |
|
|
tim_hunter
Joined: 07 Jul 2005
Posts: 2
|
| Posted: Tue Jan 02, 2007 11:45 am Post subject: Re: Extreme Networks Host Template |
|
|
| omen1000 wrote: | I have a ton of Extreme Network devices on my network... I started to create a host template for them. Currently I have the CPU load % and Internal Temperature running.
I will be adding more eventually.
Feedback is appreciated. |
in cacti 0.8.6i dont work!, why?
|
|
| Back to top |
|
|
cudcm
Joined: 16 Jan 2007
Posts: 4
|
| Posted: Wed Jan 17, 2007 5:02 am Post subject: |
|
|
| boots wrote: | Here is one of my layer 2 VLAN stats and tBGTask on a BlackDiamond running 7.4.2.6.
The tBGTask Task ID name on the graph is the decimal equivalent of the hex address shown from a "top". |
That looks very impressive. Could you please explain how to do this as I would really like to add this to my cacti install
|
|
| Back to top |
|
|
soloslinger
Joined: 19 Jan 2007
Posts: 24
|
| Posted: Tue Jan 23, 2007 4:34 pm Post subject: |
|
|
I also am interested in this. If someone who has this up and running can explain what else had to be done outside of the template itself I would appreciate it.
slinger
|
|
| Back to top |
|
|
Howie
Cacti Guru User
Joined: 16 Sep 2004
Posts: 2167
Location: United Kingdom
|
| Posted: Tue Jan 23, 2007 5:37 pm Post subject: |
|
|
| Me too. I would dearly love to get stats for traffic leaving and entering a VLAN (i.e. routed traffic). I've looked before and I'm sure it's to do with the rifXX interface in ifTable, but the stats there don't make any sense.
|
|
| Back to top |
|
|
boots
Joined: 07 Jan 2004
Posts: 49
Location: Melbourne Australia
|
| Posted: Tue Feb 27, 2007 4:50 pm Post subject: |
|
|
All,
Attached are the L2 stats and Process stats snmp query files. These are only tested on Cacti 0.8.6g and Extremeware 6.X and 7.X flavours on Black Diamonds.
As mentioned earlier, Extreme's SNMP support is crap, so you will get the Task ID I think instead of the Task Name because the Task name isnt available from SNMP. I am unsure of how XOS deals with this, as I dont have one to play with.
I recently provided some feedback regarding Epicentre and asked that it should have performance metrics such as CPU, Process CPU, VLAN bandwidth utilisation, FDB table sizes, etc etc as real time and historically sampled data built into the application.
If any of you are from reasonably sized networks and want to get on board and complain about SNMP and Epicentre, PM me for my email address and we can have a go at taking this further.
Cheers
Steve
| Description: |
|
Download |
| Filename: |
extreme_l2stats.xml |
| Filesize: |
845 Bytes |
| Downloaded: |
788 Time(s) |
| Description: |
|
Download |
| Filename: |
extreme_process.xml |
| Filesize: |
803 Bytes |
| Downloaded: |
629 Time(s) |
|
|
| Back to top |
|
|
cudcm
Joined: 16 Jan 2007
Posts: 4
|
| Posted: Mon Apr 16, 2007 4:06 am Post subject: |
|
|
| Thanks for this, I'm having a little difficulty installing these scripts. Can you run through how this is meant to be done? I've tried "Import template" but this comes back with nothing
|
|
| Back to top |
|
|
nebj00la
Cacti User
Joined: 17 Feb 2006
Posts: 56
Location: Massachusetts, USA
|
| Posted: Wed Aug 08, 2007 11:59 am Post subject: |
|
|
| cudcm wrote: | | Thanks for this, I'm having a little difficulty installing these scripts. Can you run through how this is meant to be done? I've tried "Import template" but this comes back with nothing |
What version of cacti are you using? If the template was created with a newer version than the one you are using, I don't believe it is able to be imported.
Thanks,
nebj00la
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
