[XML] Cisco SAA Jitter/Jitter-error/http template

[asen]

It still doesn't work for me. I will now try to make a new template and will report how it goes!

Thanks!
asen

[hwon]

It seems like there are few users who has trouble importing xml files. The cisco_saa.xml file is not meant to be imported via cacti import xml interface. You need to manually copy it over to a sub directory under cacti. Follow below instructions:

Copy cisco_saa.xml to following location:
<path_cacti>/resource/snmp_queries/

Import cacti_data_query_cisco_saa_statistics.xml file via cacti xml import.

I've made few changes in regards to the templates. For jitter template it will show correct maximum value for minus jitter (Before, if there was -5 and -11, it would show -5 as maximum, which is infact the minimum). Also, on jitter/error template minimum jitter's maximum has been changed to minimum. No point of having a maximum of minimum :>. And it will fix the graph where average line shows below minimum line.

Also added Voice scoring template for VoIP SAA test available with latest Cisco SAA/SLA probe. You will need to select VoIP codec (Either g711 or g729) when creating SAA/SLA probe for this to work.

Currently I cannot logon using my old account jeanvav so I won't be able to update the old xml files. So use the one attached to this post.

[Frizz]

Hi hwon (aka jeanvav), nice to see you back in the forum. I'm just working on your old templates and tested the new templates promptly.
The base concept is excellent and we want to implement it to about 2000 IPM collector jobs.
But one issue we have on our test enviroment. The "RTT ave" will stay always zero. All other RTT values are correct.
It make me wonder that you are using
RTT .1.3.6.1.4.1.9.9.42.1.2.10.1.1 not from the jitter Mib section like
the other values
RTTmin .1.3.6.1.4.1.9.9.42.1.5.2.1.4
RTTmax .1.3.6.1.4.1.9.9.42.1.5.2.1.5

We have only jitter measurement defined for this job (no extra echo or pathecho) and so the RTT value is zero, when I do a snmpget on it.
There are two values from the jitter tree 'RTTnum and RTTsum which may help to calculate the jitter average by division RTTsum/RTTnum.
What do you think about this issue?

[hwon]

As far as I know, if you define jitter probe, it will also do UDP RTT measurement. When you are getting zero on the RTTaverage, what do you get on RTTMax and RTTMin? Can you post the jitter error graph result? You are correct in that the template is using 1.3.6.1.4.1.9.9.42.1.2.10.1.1, This is done since there is no RTTAve value in jitter oid branch.

FYI, here is sample graph for voice scoring, with following IOS config:
Version 12.3(14)T6

ip sla monitor 3
type jitter dest-ipaddr 4.2.2.4 dest-port 11111 codec g729a
threshold 120
tag g729a
frequency 300
ip sla monitor schedule 3 life forever start-time now

[Frizz]

[hwon]

Since you are getting Max & MIn on Jitter/Error graph, I think you should also be getting the Ave value as well. I wouldn't be surprised if this turns out to be an IOS bug in regards to SNMP. What version are you runiing on SAA router?

The MOS score is definitely an eye candy for management, it doesn't get any easier than rating of 1 - 5 :>

[Frizz]

Hi hwon,

[fla_roadkill]

Hello, this looks like its a great template. Im using Cacti 0.8.6e, and i get the "HASH" error when trying to import. Upgrading is not an option at this point. Is there anyway to import this template? Thanks.

[hwon]

Frizz,
Yes, I have been keeping an eye on that project. Definitely, something we would like to try out for that kind of application.

fla_roadkill,
There is ways to import newer templates from older version of cacti:
http://forums.cacti.net/about10309.html
However, like author states in this link, not sure what the effect will be... gl.

[tun]

I have imported the template to my cacti. also configured IP SLA on my Cisco 7206 VXR. I have created IP SLA for icmp-jitter with schedule of forever. But on my cacti graph it only showing RTT but nothing else.

Did I miss anything? BTW, my Cacti is 0.8.6d and I am pretty new to cacti.

[Frizz]

[tun]

It is now plotting. I have to use UDP-jitter. It wasn't cacti's fault. It has something to do with Cisco because snmpwalk with coressponding OID return zero value. Hence I won't see anything on Cacti graph.

BTW, my Cisco IOS is 12.4 and it doesn't support rtr command.

Thanks anyway.

[mgysi]

When setting up a new graph (Create Graph from 'Cisco - SAA Jitter Statistics'), Cacti asks me for Index Type, Index Value and Output Type ID. I'm new to Cacti and a bit lost. Can someone give me an example of what to put here?

I'm trying to read this here:

[NoisyOcean]

I try this templates, but they dosn't work for me - there aren't any graphs.
I can find where is the problem.. ip sla is working, and I can get infor with snmpwalk command on CLI.

[cotontige]

Hi all, how can i configure my cisco 3750 switch to monitorind the jitter please ?

Thanks in advance