Trango M5830S, host template w/ dependencies (queries, etc.)

Red · Joined: 20 Jun 2006 Posts: 38

I'm running Cacti 0.86h. So to verify - I rename the data query files and try importing them through the "Import Templates" section, and if that doesn't work I should upload them to the snmp_queries directory manually? And when when that is done, I import the host template.

Frances · Posted: Mon Jul 17, 2006 6:42 pm Post subject:

Exactly -- I can see re-reading my post how that would have been unclear -- sorry about that.

Red · Joined: 20 Jun 2006 Posts: 38

Adding new host:

Red · Joined: 20 Jun 2006 Posts: 38

I nuked cacti on one of my servers and reinstalled (removed and reinstalled with apt, not a CactiEZ install). Loaded the xml files (and it DID load the files to the snmp_queries this time), but when you add a host under the Trango template it doesn't show any asociated data queries or graph templates. When I try to add the AP data query, I get the same error as above.

beavis · Joined: 11 May 2004 Posts: 23

Well, thanks for the information Francis and Eger (we meet again.

)

I am setting up a new Cacti server and after several hours, I got it to work except for a couple things:

1) The RSSI graphs are not showing any data. The graph is there, but the values are all "nan"

2) The Traffic graphs only show ONE side of the traffic for both the AP and SUs - the outbound traffic. The inbound traffic is "nan" I checked the data templates and both "inbound'' and "outbound" are listed there and looks like they're setup correct.

Any suggestions as to what might be happening? It's almost like the OIDs are incorrect for the inbound traffic.

ptera · Joined: 24 Jul 2006 Posts: 14

ArborcrestAP to Sullivan (cust-426.ptera.net)
SNMP Information
System: Trango Systems Inc. SNMP agent for M5830S
Uptime: 8215000
Hostname:
Location:
Contact:

Data Query Debug Information

+ Running data query [10].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ ''
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'

Associated Graph Templates

Graph Template Name Status
No associated graph templates.

Associated Data Queries

Data Query Name Debugging Re-Index Method Status
1) Trango M5830S AP - AP Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]
2) Trango M5830S AP - SU Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]

paonia · Joined: 30 Oct 2006 Posts: 2

kaptk2 · Posted: Mon Nov 20, 2006 1:31 pm Post subject:

I am still having trouble with getting things graphed. All the XML files seem to be loaded ok but when I go to create graphs I get this error:

ptera · Joined: 24 Jul 2006 Posts: 14

Here is what I get when adding a device..

SNMP Information
System: Trango Systems Inc. SNMP agent for M5830S
Uptime: 59060840
Hostname:
Location:
Contact:

+ Running data query [11].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ ''
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap.xml'

+ Running data query [10].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ ''
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'

What I put in red looks funny to me. @ '' <- why is this blank. (BTW I know absolutely nothing about XML)

1) Trango M5830S AP - AP Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]
2) Trango M5830S AP - SU Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]

geskorup · Joined: 23 Nov 2006 Posts: 11

Same problem.

Data Query Debug Information

+ Running data query [17].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ ''
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'
+ Found data query XML file at '/usr/local/share/cacti/resource/snmp_queries/trango_m5830s_ap_su.xml'

Associated Graph Templates

Graph Template Name Status
No associated graph templates

Associated Data Queries

Data Query Name Debugging Re-Index Method Status
1) Trango M5830S AP - AP Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]
2) Trango M5830S AP - SU Statistics (Verbose Query) Uptime Goes Backwards Success [0 Items, 0 Rows]

kaptk2 · Posted: Sat Nov 25, 2006 11:59 am Post subject:

So does anybody know how to fix it? If anybody does have a solution please share it here so we all can benifit.

gerbilnut · Joined: 02 Apr 2007 Posts: 3

I managed to get most of the template stuff working, or at least imported, but when I try to "Add graphs for this host" I get the error messages that I attached in the screen shot. I am running, 0.8.6i

Anyone that has had any luck with this know what could be going on?

djcronos · Joined: 09 Feb 2007 Posts: 28

Okay, so who here has ACTUALLY got this to work? With all the files uploaded, and all the broken instructions and people having issues, I'm not sure how to get these working.

I tried to import the templates, they said they were imported successfully, but then when I go into /opt/cacti/resource/snmp_queries no .xml files were uploaded - so I uploaded the 3 files that Frances had attached most recently to this forum post, and removed the 'cacti_data_queries' from the filenames.

This is what I see when I click 'Create Graphs for Host', using the Trango AP AP template:

Red · Joined: 20 Jun 2006 Posts: 38

I took another swing at this with the latest version of cacti, still no go. I get hung up in the same spot. Does ANYONE have this working? Is it even a problem with the templates? I'm thinking of starting a new thread to troubleshoot the "Undefined index: oid_index" errors, but I don't want to make any duplicates. Could be that the people who know how to fix this are ignoring the topic as a trango specific error, which it may not be...

geskorup · Joined: 23 Nov 2006 Posts: 11

Try my Trango templates located here.. http://forums.cacti.net/about22214.html