dhcpd-snmp

adrianmarsh · Cacti User Joined: 17 Aug 2005 Posts: 417 Location: UK

jokerz...

this is for *ux systems only, not win32.

I started installing this.. but gave up.. the cacti bit went fine, and I figured out that you had to install dhcpd-snmp itself first, but I can't see how you set that up if your dhcp server isn't the same box as the Cacti server. what-goes-where?

adrianmarsh · Cacti User Joined: 17 Aug 2005 Posts: 417 Location: UK

Correction:

I was able to get this working in the end... After downloading dhcpd-snmp, make, and make install worked, I then found better instuctions in the /usr/local/sbin/dhcpd-snmp script (at the end).

Once I added the snmp line to snmpd.conf and modified the .conf script (the .pl tool mis-read my Centos DHCP config), then all was ok..

D43m0n · Joined: 01 Jun 2005 Posts: 4

Hi all,

I've been struggling for a while now, but I can't get the graphs going as expected. I have 6 different scopes on one DHCP server. I want to graph them all with these great tools, but for some reason, I can't get them going like you guys.

The pool description is displayed in cacti when I want to add the graph on the host in question, but all I get is the poolSize. nothing else. When I exec an snmpwalk on the cacti host to the DHCP server, I can get all the values I want, but in cacti, this doesn't work for me.

Does anyone have a clue what I'm doing wrong?

Thanks in advance!

adrianmarsh · Cacti User Joined: 17 Aug 2005 Posts: 417 Location: UK

Put the debug in Cacti to full, let one itteration run, then reduce the logging and take a look through the log. Look for what Cacti sees as the results.

Stephan · Joined: 14 Mar 2003 Posts: 6

Hi all,

just a big THANKs for this Template. It works perfectly well for our Servers with up to 15 subnets and ranges with up to a few thousands of hosts.

The only "problem" was to correct the data-sources in the template. After the import everything was set to one data-source.

bye
Stephan