|
|
| Author |
Message |
sauron
Joined: 05 Jul 2006
Posts: 42
Location: London, UK
|
 Posted: Mon Aug 07, 2006 11:39 am Post subject: Zeus ZXTM templates |
 |
|
I've created the following templates for graphing the ZXTM load balancer product from Zeus. They represent my first tempate set for Cacti, so they might still be a bit rough around the edges- YMMV.
Attached file contains the exported templates from Cacti, along with the data query XML files and the scripts that fetch the actual data. You'll need to have SNMP enabled on your ZXTM box, the net-snmp tools installed, Perl, and the Perl Bit::Vector module. This is used to recombine the two 32 bit half counters provided by ZXTM for various values into single 64 bit counters.
Any feedback would be welcome.
Mike
| Description: |
|
Download |
| Filename: |
zxtm_cacti.tar.gz |
| Filesize: |
10.48 KB |
| Downloaded: |
455 Time(s) |
|
|
| Back to top |
|
 |
suse
Joined: 13 Nov 2005
Posts: 23
|
| Posted: Sat Aug 26, 2006 10:09 pm Post subject: it does not work |
|
|
hey
I installed this
but can not query data from zxtm host
Data Query [ZXTM - Get Available Nodes] Reload Associated Query
This data query returned 0 rows, perhaps there was a problem executing this data query. You can run this data query in debug mode to get more information.
Data Query [ZXTM - Get Virtual Servers] Reload Associated Query
This data query returned 0 rows, perhaps there was a problem executing this data query. You can run this data query in debug mode to get more information.
problem is my snmp running on 161, but you can not enable 161 on zxtm anymore.
so I changed port to 1161
| Code: | + Running data query [12].
+ Found type = '4 '[script query].
+ Found data query XML file at '/home/httpd/htdocs/cacti/resource/script_queries/zxtm_nodes.xml'
+ XML file parsed ok.
+ Executing script for list of indexes '/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 index'
+ Executing script query '/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 query index'
+ Executing script query '/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 query ip'
+ Executing script query '/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 query port'
+ Executing script query '/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 query host'
+ Found data query XML file at '/home/httpd/htdocs/cacti/resource/script_queries/zxtm_nodes.xml'
+ Found data query XML file at '/home/httpd/htdocs/cacti/resource/script_queries/zxtm_nodes.xml'
+ Found data query XML file at '/home/httpd/htdocs/cacti/resource/script_queries/zxtm_nodes.xml' |
|
|
| Back to top |
|
|
sauron
Joined: 05 Jul 2006
Posts: 42
Location: London, UK
|
| Posted: Tue Aug 29, 2006 6:53 am Post subject: |
|
|
Can you run the scripts from the command line?
What happens if you try to execute:-
| Code: |
/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 index
|
This should return you a list of nodes. Similarly, replacing "nodes" with "vservers" should give you list of virtual servers. The script uses snmptable to return the data - if your SNMP agent listens on something other than udp:161 you'll need to change the lines in the code that call snmptable to use the different port. For 1160, you'd need something like:-
| Code: |
open(NODELIST, "$snmptable -CHif : -v 1 -c $community ${address}:1161 $nodetableoid | ");
|
You'd need to change all the lines that call snmptable, but there are only 4 or 5.
|
|
| Back to top |
|
|
suse
Joined: 13 Nov 2005
Posts: 23
|
| Posted: Mon Sep 11, 2006 9:58 am Post subject: |
|
|
/usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33 index
Was that a table? SNMPv2-SMI::enterprises.7146.1.2.4.2
[root@bk2 mysql]# /usr/bin/perl /home/httpd/htdocs/cacti/scripts/query_zxtm.pl nodes public 192.168.20.33:1161 index
Was that a table? SNMPv2-SMI::enterprises.7146.1.2.4.2
|
|
| Back to top |
|
|
sauron
Joined: 05 Jul 2006
Posts: 42
Location: London, UK
|
| Posted: Mon Sep 11, 2006 10:20 am Post subject: |
|
|
Hmm - maybe your ZXTM uses a different MIB?
When I download the mIB from my ZXTM box, and install it under /usr/local/share/snmp/mibs/ I can test the OID like so:-
| Code: |
# snmptranslate .1.3.6.1.4.1.7146.1.2.4.2
ZXTM-MIB::nodeTable
|
So, it should be a table. If it isn't, I suggest you have a look at the output of an snmpwalk to see:-
| Code: |
# snmpwalk -v 1 -c public 10.0.0.250 .1.3.6.1.4.1.7146
|
You can easily replace the OID values in the script once you've found the base OID, but you need to get the snmptable command to give you sensible output for the node table before the rest will start to work:-
| Code: |
# snmptable -v 1 -c public 10.0.0.250 .1.3.6.1.4.1.7146.1.2.4.2
SNMP table: ZXTM-MIB::nodeTable
nodeIPAddress nodePort nodeHostName nodeState nodeBytesToNodeLo nodeBytesToNodeHi nodeBytesFromNodeLo nodeBytesFromNodeHi nodeCurrentConn nodeTotalConn nodePooledConn nodeFailures nodeNewConn
10.0.0.1 80 "10.0.0.1" alive 4170286545 15 1919442481 574 159 150205862 0 4 150205862
10.0.0.1 443 "10.0.0.1" alive 0 0 0 0 0 0 0 0 0
10.0.0.24 80 "10.0.0.24" alive 4204838387 1 4117765818 70 23 18636308 0 5539 18636308
10.0.0.24 443 "10.0.0.24" alive 5344761 0 91347631 0 1 6326 0 51 6326
10.0.0.25 80 "10.0.0.25" alive 4277205700 1 56025919 72 22 18775887 0 0 18775887
10.0.0.25 443 "10.0.0.25" alive 5407660 0 94030751 0 1 6371 0 0 6371
10.0.0.26 80 "10.0.0.26" alive 4278287694 1 3555831615 71 23 18775881 0 0 18775881
10.0.0.26 443 "10.0.0.26" alive 5402503 0 91229361 0 1 6317 0 0 6317
10.0.0.27 80 "10.0.0.27" alive 4278898974 1 3603293938 71 25 18775867 0 0 18775867
10.0.0.241 25 "10.0.0.241" alive 0 0 0 0 0 0 0 0 0
10.0.0.241 53 "10.0.0.241" alive 0 0 0 0 0 0 0 0 0
10.0.0.242 25 "10.0.0.242" alive 0 0 0 0 0 0 0 0 0
10.0.0.242 53 "10.0.0.242" alive 0 0 0 0 0 0 0 0 0
10.0.1.24 80 "10.0.1.24" alive 0 0 0 0 0 0 0 50 0
10.0.1.24 443 "10.0.1.24" alive 4873403 0 84797486 0 0 5714 0 47 5714
10.0.1.25 80 "10.0.1.25" alive 0 0 0 0 0 0 0 0 0
10.0.1.25 443 "10.0.1.25" alive 4888986 0 83538772 0 0 5708 0 0 5708
|
If that works, then you should be able tp get the script to produce sensible output, and then you'll start to be able to get data into Cacti.
|
|
| Back to top |
|
|
suse
Joined: 13 Nov 2005
Posts: 23
|
| Posted: Wed Sep 13, 2006 11:12 am Post subject: |
|
|
| shall I install zxtm MIB into cacti server?
|
|
| Back to top |
|
|
sauron
Joined: 05 Jul 2006
Posts: 42
Location: London, UK
|
| Posted: Wed Sep 13, 2006 11:26 am Post subject: |
|
|
| Installing the MIB will allow the snmp utilities to use nice symbolic names for things, rather than just OIDs. If your device has a different MIB to mine it should be obvious if you try what I suggested in my previous post. It's not going to actually fix stuff for you, though.
|
|
| Back to top |
|
|
doussot
Joined: 03 Jun 2007
Posts: 1
|
| Posted: Sun Jun 03, 2007 5:37 am Post subject: |
|
|
Hello,
Does anyone has a solution for this problem. I'm running Zeus 4.1 and we have the same problem.
I've tried what was suggested but I can't figure out how to find the correct OID
| Code: |
...
SNMPv2-SMI::enterprises.7146.1.2.4.1.0 = INTEGER: 3
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.1.195.154.98.98.80 = IpAddress: 195.154.98.98
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.1.195.154.98.99.80 = IpAddress: 195.154.98.99
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.1.195.154.98.100.80 = IpAddress: 195.154.98.100
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.2.195.154.98.98.80 = INTEGER: 80
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.2.195.154.98.99.80 = INTEGER: 80
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.2.195.154.98.100.80 = INTEGER: 80
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.3.195.154.98.98.80 = STRING: "195.154.98.98"
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.3.195.154.98.99.80 = STRING: "195.154.98.99"
SNMPv2-SMI::enterprises.7146.1.2.4.2.1.3.195.154.98.100.80 = STRING: "admin-lp.lpn.fr"
.... |
table doesn't seem to exist
| Code: | snmptable -m ALL -v 1 -c zeus <private>:1161 1.3.6.1.4.1.7146.1.2.4
Was that a table? ZXTM-MIB::nodes |
Any suggestion ?
Thanks.
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
