updated version of Cisco SFP (with DOM) Optical value plugin still doesn't work for me in respect to be able to read DOM from SFP-GE-L transceivers I have plugged in into 5-port SPA-5X1GE-V2 cards installed into 7600-SIP-600-DC modules.
No issues with getting values when SFP installed into Supervisor VS-S720-10G. ( i.t int Te5/4, 6/4 in 6509 )
I know DOM works because I can manually retrieve values, i.e. :
Router#sho hw-module subslot 8/0 transceiver 4 status
The Transceiver in slot 8 subslot 0 port 4 is enabled.
Module temperature = +22.230 C
Transceiver Tx supply voltage = 3275.6 uVolts
Transceiver Tx bias current = 3130 uAmps Transceiver Tx power = -6 dBm
Transceiver Rx optical power = -7 dBm
However, when I run old or new php script, it never sees any of int Gi8/0/? as DOM capable :
C:\Apache\htdocs\cacti\scripts>php -q ss_65xx_sfp.php A.B.C.D public 2 query index
I have to point out that usual syntax which works for Sup ( show int Te5/4 transceiver ) does not work for SFPs installed in SPA ports returning :
Router#sho int Gi8/0/0 transceiverModule 8 doesn't support DOM
but obviously DOM works because sub-slot syntax does return Tx/Rx Power.
However, I was unable to find proper query to get interfaces which are DOM capable.
IOS is : s72033-adventerprisek9_wan-mz.122-33.SXI2.bin
I found this : http://www.snmplink.org/OnLineMIB/Cisco/index.html#2905
but my 6509 doesn't want to return anything from ciscoModules although every IOS after SXH shows it as supported.
Was anybody able to get readings from SPA ports ? Does anybody need more details on my hardware ?