Sensatronic EM1 monitors

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Posts: 4
Joined: Fri Jun 09, 2006 7:54 am

Sensatronic EM1 monitors

#1 Post by derk25 » Fri Jun 09, 2006 8:18 am

I have spent some time setting up cacti hoping I could graph some sensatronic EM1 monitors (Actully this was my only reason for setting up cacti). When I try to get cacti to talk to these devices I get an SNMP error. I can easily do a snmpwalk and get all the info I want and I know cacti is working and have all the up to date software as mentioned in the manual. Having searched through the forum I have seen a few attempts to get this working. Has anyone been successful and is willing to share there experience? Or does anyone know of a way to get it to work?


Posts: 6
Joined: Thu May 11, 2006 2:21 pm

#2 Post by CaM » Fri Jun 09, 2006 11:53 am

I managed it using the simple walk through found in another post. Currently graphine temperature and Humidity.

I have exported the data host and graph templates for you to give it a go. Exported from 0.8.6g
(8.11 KiB) Downloaded 1045 times

Posts: 4
Joined: Fri Jun 09, 2006 7:54 am

#3 Post by derk25 » Mon Jun 12, 2006 5:49 am

CaM this is great. Thanks for doing this, looks good so far.

User avatar
Posts: 22375
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany

#4 Post by gandalf » Mon Jun 12, 2006 1:15 pm

Moved to Scripts and Templates

Cacti User
Posts: 443
Joined: Fri Mar 12, 2004 1:22 pm

#5 Post by argon0 » Wed Mar 04, 2009 11:29 am

Anybody else notice this takes ages (e.g. 10-16 seconds) to run?

I've got 4 sensors on an e16, it takes an additional 10-16 seconds to run the poller when I've got this device enabled.

Would it not be possible to use the HTTP output that these devices provide?

(i.e. from the manual: Telnet to device's IP on port 80 issues GET /temp HTTP/1.0)

[size=50]No longer a n00by but[/size] not yet an 0ldby

Now Head of Technology at RSCH, back to the prickly subject of Monitorring....

Post Reply