Arris C3 CMTS template

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Author
Message
User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

Arris C3 CMTS template

#1 Post by timi » Wed Aug 30, 2006 10:59 am

hi,
here is another C3 template for FEC,UGS,SNR,MiniSlots,MER,Modem Count,UGS,Utilization per upstream available only for version 4.3.0.39 and up...
Attachments
ugs.png
ugs.png (51.87 KiB) Viewed 13052 times
snrmer.png
snrmer.png (38.69 KiB) Viewed 13052 times
minislots.png
minislots.png (57.37 KiB) Viewed 13052 times
mcount.png
mcount.png (27.64 KiB) Viewed 13052 times
fec.png
fec.png (47.77 KiB) Viewed 13052 times
Last edited by timi on Fri Dec 16, 2011 6:30 am, edited 1 time in total.

User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#2 Post by timi » Thu Aug 31, 2006 6:12 am

exported from cacti version 0.8.7g
Last edited by timi on Fri Dec 16, 2011 6:42 am, edited 3 times in total.

User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#3 Post by timi » Thu Aug 31, 2006 6:13 am

Last edited by timi on Fri Dec 16, 2011 6:39 am, edited 2 times in total.

Makena
Posts: 1
Joined: Wed Sep 06, 2006 7:32 am
Contact:

#4 Post by Makena » Wed Sep 06, 2006 7:33 am

Thanks
Work very good :)

Do you have for Arris 1500 Cornerstone ?

User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#5 Post by timi » Wed Sep 06, 2006 8:57 am

Makena wrote:Thanks
Work very good :)

Do you have for Arris 1500 Cornerstone ?
sorry, I don't have for 1500, and I can't make becouse we dont have any 1500 :( aynway for 1500 you can get only FEC, modem count, and SNR using snmp

ItsNewToYou
Posts: 8
Joined: Mon Oct 18, 2004 9:11 am
Contact:

Arris C4

#6 Post by ItsNewToYou » Fri Nov 10, 2006 10:57 am

Has anyone been able to modify this script to get it to work with a C4? It looks like the OIDS are different than a C3.

ItsNewToYou

ad_vlad
Posts: 6
Joined: Thu Nov 24, 2005 8:41 am

#7 Post by ad_vlad » Thu Jun 28, 2007 6:31 am

hi, could anyone help me with installing this template ?
i have imported all the .xml files through cacti. I have tried to add the device but it complained something about C3.... . I found out that I have to copy the c3.xml to resources/script_queries.
Is there anything else that i need to do by hand ?

Cacti isn't generating the RRD files. When i go on the device page, it gets data from the device correctly. When doing a tcpdump on the device's ip, i don't see it beeing pooled when it should, but instead only when i'm going on the device page.

Cacti lists the device as up (had a problem with another device that was seen as down and changed the up detection to ping and snmp with icmp and the later device was fixed).

macdaddy
Posts: 39
Joined: Fri Jan 13, 2006 4:00 pm

Combing the upstream sub-interfaces into physical upstreams

#8 Post by macdaddy » Tue Dec 18, 2007 12:48 am

I loaded up the C3 additions into Cacti recently. For the most part they work great. I was trying to get the number of modems graphed in advance of an impending ice storm so we could know within a few minutes if we lost part of our plant (using the thold plugin). Once thold had enough data to kick in and send off alerts it quickly became apparent that there was a problem. We have multiple sub-interfaces on our C3 upstreams. On many of our C3s each sub-interface has a different modulation profile. We have periodic load-balancing configured as well. What we see is a large percentage of modems drop from one upstream sub-int; this kicks off a thold alert. However nothing is down. The load-balancing just moved a number of modems over to the other sub-int on the same physical interface. Ie, we lost 50 modems on 1.0 but picked them up on 1.1; so there really isn't a problem.

The fix is to somehow graph the modems on the physical interface and not the logical interface. I've tried adding a graph of the physical interface in Cacti but no data is pulled. Is there a way to combine the 2 sub-ints via a template? How are other folks doing this? The Arris folks suggested the load-balancing config and said that it's very common. All I really want to do is graphs the total online modems on a given upstream so I can then use thold to alert me if we have a 10% change or so. This will let us find out about plant issues sooner rather than later (or never). This AM we had a CATV processor for channel 62 go nuts on us and start feeding noise out into the plant. This caused massive cable Internet problems for about an hour until we found the problem. A graph of the total number of online modems would have helped us find the problem sooner. Had it not been for the fact that I was monitoring certain network devices on the cable system we wouldn't have found out nearly as fast that we had an issue.

Thanks
J

User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#9 Post by timi » Tue Dec 18, 2007 5:38 am


User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#10 Post by timi » Tue Dec 18, 2007 5:39 am

ad_vlad wrote:hi, could anyone help me with installing this template ?
i have imported all the .xml files through cacti. I have tried to add the device but it complained something about C3.... . I found out that I have to copy the c3.xml to resources/script_queries.
Is there anything else that i need to do by hand ?

Cacti isn't generating the RRD files. When i go on the device page, it gets data from the device correctly. When doing a tcpdump on the device's ip, i don't see it beeing pooled when it should, but instead only when i'm going on the device page.

Cacti lists the device as up (had a problem with another device that was seen as down and changed the up detection to ping and snmp with icmp and the later device was fixed).
what firmware version do you use ?

joyssue
Posts: 25
Joined: Tue Feb 27, 2007 4:32 am

help

#11 Post by joyssue » Tue Jan 22, 2008 7:30 am

C3 template for FEC,UGS,SNR,MiniSlots,MER,Modem Count,UGS,Utilization per upstream is not available for version 4.4.1.3.
Attachments
c3.jpg
c3.jpg (74.05 KiB) Viewed 34634 times

User avatar
timi
Cacti User
Posts: 240
Joined: Wed Nov 09, 2005 8:35 am
Location: Timisoara, Romania
Contact:

#12 Post by timi » Wed Jan 23, 2008 6:26 am

check if 4.4.x.x supports that oids ... we only use 4.3.x.x

apmav
Posts: 4
Joined: Fri Sep 26, 2008 5:08 am

#13 Post by apmav » Fri Sep 26, 2008 5:11 am

Anyone has a template for the C4 CMTS? I have the 2 index problem and cannot graph the modem count

Many thanks

Andreas

CristianDeluxe
Posts: 5
Joined: Mon Sep 21, 2009 12:51 pm
Location: Spain

#14 Post by CristianDeluxe » Fri Sep 25, 2009 10:45 am

I tried this template with my C3 (version 4.4.4.9) and don't work!!

I need to modify something or this template just don't work with this version?

Thanks!

User avatar
mac86
Posts: 4
Joined: Wed Jul 09, 2008 9:19 am
Location: Argentina - Bahia Blanca

#15 Post by mac86 » Mon Sep 13, 2010 2:05 pm

Hi! very good template...!


How ever doesn't work for me, because my Arris C3 version is 4.4.x.x :(
ARRIS CLI version .02
Application image: 4.4.0.59, Apr 24 2007, 15:27:54
Sombody can tell me where can I get OIDs for ARRIS C3 v4.4.0.59 ??

Best regards,
Andres.

Post Reply