MGE Pulsar MX 5000 UPS & Environmental sensor

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Author
Message
esh
Posts: 5
Joined: Sun Jan 28, 2007 10:05 pm

MGE Pulsar MX 5000 UPS & Environmental sensor

#1 Post by esh » Mon Jan 29, 2007 1:09 pm

Requesting a template for this unit
MGE Pulsar MX 5000 UPS & snmp card (model 66102) & the environmental sensor
http://www.mgeups.com/products/pdt120/1 ... /index.htm
http://www.mgeups.com/products/pdt120/s ... /cards.htm

I found 2 MGE templates on the forums, part works for monitoring the battery level, runtime remaining & some others. The real problem I have been having is trying to get the temperature & humidity from the UM sensor addon.

I have tried a ton of OIDs that I have found which return the Temperature in Celsius. Ie. .1.3.6.1.4.1.705.1.8.1.0 returns "216" which is 21.6 degrees C

There are many other OIDs that return this as well and I have tried all of them with no luck. I am just using a snmp get utility to test OIDs out... then I modify the data templates.
Attachments
mgeups_mib17_ad.mib.txt
MIB
(90.05 KiB) Downloaded 1487 times

esh
Posts: 5
Joined: Sun Jan 28, 2007 10:05 pm

#2 Post by esh » Mon Jan 29, 2007 3:06 pm

I think I may have it now... will post a template if I get it done soon.

I removed everything and then recreated from scratch, appears to be pulling it in now.

esh
Posts: 5
Joined: Sun Jan 28, 2007 10:05 pm

#3 Post by esh » Tue Jan 30, 2007 4:43 pm

v1 Template attached
Attachments
cacti_host_template_mge_pulsar_mx.xml
Host Template
(37 KiB) Downloaded 1493 times

Post Reply