Cisco Temperature

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Author
Message
JohnKiniston
Posts: 1
Joined: Fri Oct 29, 2004 5:54 pm

Cisco Temperature

#1 Post by JohnKiniston » Fri Oct 29, 2004 6:01 pm

I wanted to have both my Inlet and Output temperatures on the same graph instead of as two separate graphs.

You still need to have two data sources, One for the intake and one for the outlet but this should let you graph them on the same graph.

Attached should be a graph template, I convert from Celsius to Fahrenheit when I graph via a CDEF of

CURRENT_DATA_SOURCE,9,*,5,/,32,+
Attachments
snmp_temperature.xml
(23.76 KiB) Downloaded 3097 times

julien
Posts: 3
Joined: Sat May 01, 2004 9:19 am

#2 Post by julien » Wed Nov 03, 2004 10:44 am

Hello !

I use a Cisco 6509

I can snmpwalk in the tree parts of the MIB for temperature, FAn etc.

I just want to monitor all temperature for each modules.
Does anybody do this ? Could he give me their templates?

I would like to have one graph for each module.

SeeU!
Attachments
temp_desc.jpg
All the Descriptions of my temp sensors!
temp_desc.jpg (58.07 KiB) Viewed 19233 times
JulienB

crinago
Posts: 17
Joined: Mon Feb 21, 2005 1:36 am

Re: Cisco Temperature

#3 Post by crinago » Tue Mar 01, 2005 4:30 am

JohnKiniston wrote:I wanted to have both my Inlet and Output temperatures on the same graph instead of as two separate graphs.

You still need to have two data sources, One for the intake and one for the outlet but this should let you graph them on the same graph.

Attached should be a graph template, I convert from Celsius to Fahrenheit when I graph via a CDEF of

CURRENT_DATA_SOURCE,9,*,5,/,32,+


I have the same objective as yours for my 7513 router but this time i want to monitor all three temperatures: inlet, hotpoint and exhaust
I can't access your xml file.. can you post it again?? and also give a rundown on how to use the file??? thanks

aaa111
Posts: 3
Joined: Tue Nov 23, 2004 12:55 am

Re: Cisco Temperature

#4 Post by aaa111 » Wed Mar 02, 2005 1:51 am

crinago wrote:
JohnKiniston wrote: I can't access your xml file.. can you post it again?? and also give a rundown on how to use the file??? thanks
it's simple, for example - my scripts for supply, temperature and voltage for cisco chassi, where envmon available.
Attachments
cisco-envmontemperature.xml
Queries a host for temperature status
(1.25 KiB) Downloaded 4679 times
cisco-envmonsupply.xml
Queries a host for supply status
(891 Bytes) Downloaded 1573 times
cisco-envmonvoltage.xml
Queries a host for voltage status
(1.49 KiB) Downloaded 1955 times

Post Reply