Powerware 9305 + 9120 UPS host template

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Posts: 7
Joined: Mon Jun 06, 2005 12:47 am

Powerware 9305 + 9120 UPS host template

#1 Post by richiev » Tue Jul 05, 2005 2:59 am

Hi all,

Here is a host template (with dependencies) that I have created for Powerware 9305 + 9120 UPS's that have the ConnectUPS Web/SNMP adapter. This is my first attempt at a template and it seems to work fine on my Cacti (ver 0.8.6f) and the values seem fine.

The host templates display graphs for Output Current (Amps), Output Load (%), Output Power (Watts), and Output Voltage (Volts) and Input Voltage (Volts) for each of the 3 phases on the UPS. It also graphs Battery Voltage (Volts).

Hope this helps anyone that needs it. (and I hope it is right)

(44.9 KiB) Downloaded 1956 times
(90.68 KiB) Downloaded 2116 times

Posts: 19
Joined: Thu Jun 09, 2005 8:51 am


#2 Post by bdearlove » Thu Jul 07, 2005 3:51 pm


Just gave it a try and it gave a: Error: XML: Hash version does not exist.

I'm going to try and upgrade to F and see if it works! Wish me luck!

Posts: 31
Joined: Wed Jan 19, 2005 2:34 pm

#3 Post by fla_roadkill » Wed Jul 13, 2005 9:22 am

Did it work upgrading to F? I have Cacti d, installed patched to E, and THOLD installed. I tried adding in F to my config_array.php but it just broke cacti. Any help to install this template while running THOLD.

Posts: 20
Joined: Thu Dec 04, 2008 5:10 pm

#4 Post by gheppner » Fri Jul 17, 2009 10:24 am

Great templates. They seem to also work with the Power 9355 and 9333.

I added a couple of potentially useful graphs to your host template - "Battery percent charge" and "Battery runtime."
(110.17 KiB) Downloaded 1660 times

Post Reply