Cacti (home)ForumsDocumentation
Cacti: offical forums and support
It is currently Wed Dec 12, 2018 10:59 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Liebert GXT UPS
PostPosted: Thu Aug 04, 2005 10:37 am 
Offline

Joined: Thu Aug 04, 2005 10:33 am
Posts: 5
Only supports single input/output Liebert UPSs, tested on a GXT2U with SNMP (not OCWEBCARD- but it should work on that as well).

I recommend setting your SNMP timeout higher than 500 (mine's set to 5000) since the cards have a tendancy to be slow to respond when you hammer them with requests.

Contains:
1 Host template - Liebert UPS
4 Graph templates - Battery, Input, Output, Output Watts
9 Data templates


Attachments:
File comment: XML Containing all templates.
liebert.xml [56.42 KiB]
Downloaded 2397 times
Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 03, 2005 9:46 am 
Offline

Joined: Thu Aug 04, 2005 12:23 pm
Posts: 27
Nice template.

However I have a Liebert nFinity UPS. The OIDs you used are not found on our UPS. The nFinity must have different MIBS. I'm currently looking for them to see if I can just update the OIDs that you used but keep your templates.


Top
 Profile  
 
 Post subject: Liebert GXT2U with newest card
PostPosted: Tue Nov 22, 2005 11:14 am 
Offline

Joined: Wed Mar 10, 2004 12:55 pm
Posts: 14
Location: Columbus, OH
This template works with GXT2U and Nfinity UPS' with the newest (OCWEB) card.

Here is my save of your template, corrected to work with a GXT2U and the current network card. I have never worked with templates like this before so if anyone can test it and provide feedback that would be great.

edit/update: I changed the naming on the template so it will allow for multiple types of liebert UPSs.

Another edit/update: I altered the limits, which were the only things stopping this from working with a Nfinity (since the voltages are much higher).

If anyone is using this template, i would love to hear from you.


Attachments:
File comment: liebert ups with ocweb card
cacti_host_template_liebert_ocweb.xml [57.8 KiB]
Downloaded 1485 times
Top
 Profile  
 
 Post subject: Modifed - environment temp added
PostPosted: Mon Jun 12, 2006 11:20 pm 
Offline
User avatar

Joined: Wed Dec 01, 2004 9:14 pm
Posts: 8
Location: Santorini of the South - New Zealand
I've modified the cacti_host_template_liebert_ocweb.xml to include
- Overview graph of temp / batt time at current load / output load
- Temp graph

Got the TEMP OID here
http://support.ipmonitor.com/mibs/LIEBERT-GP-ENVIRONMENTAL-MIB/tree.aspx
Great resource

This is up and monitoring a Liebert NX40 ups

All Temps are in degrees Celcius (NOTE there is a degrees Fahrenheit OID)

Thanks to jeffmeden for the orignal


Attachments:
cacti_host_template_liebert_ocweb.xml [70.99 KiB]
Downloaded 2385 times
Top
 Profile  
 
 Post subject: Re: Modifed - environment temp added
PostPosted: Wed Jul 12, 2006 9:51 am 
Offline

Joined: Wed Jul 12, 2006 9:49 am
Posts: 1
Location: Toronto, ON
Works great with a GXT2U 2000VA. I had to bump the "run time remaining" since with 4 external batteries I have about 7000 minutes at no load :-)


Top
 Profile  
 
 Post subject: Re: Modifed - environment temp added
PostPosted: Thu Aug 24, 2006 7:34 pm 
Offline

Joined: Thu Aug 10, 2006 5:47 pm
Posts: 2
Location: Aotearoa
I tried importing the various Liebert templates posted by ragnar, jeffmeden and dorje but I got this:

Error: XML: Hash version does not exist.

Any pointers appreciated


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 24, 2006 7:53 pm 
Offline
Developer/Forum Admin
User avatar

Joined: Mon Nov 17, 2003 6:35 pm
Posts: 6014
Location: Michigan, USA
The template is created in a newer version of Cacti than you are using.

_________________
Tony Roman
Experience is what causes a person to make new mistakes instead of old ones.
There are only 3 way to complete a project: Good, Fast or Cheap, pick two.
With age comes wisdom, what you choose to do with it determines whether or not you are wise.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 10, 2006 3:29 am 
Offline

Joined: Mon Sep 11, 2006 7:55 pm
Posts: 7
has anyone gotten this working in an NX40? I loaded the templates but dont get any data (except temprature).

I used a mib tool and I verified the templates are correct as the values are graphable from solarwinds.

anyone?? :)

EDIT: Okay saw that the last template is for a NX40

what firmware is your OCEWEB card running.

EDIT: Okay figured it out. I added a "." (ie. full stop) before the OID and they all started working. I also had to adjust the graph scales as the default was 500 but my battery voltage for example is 577.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 08, 2007 12:31 pm 
Offline

Joined: Thu Mar 08, 2007 12:26 pm
Posts: 1
I found out that the Fahrenheit MIB is .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3.1 and so i had already imported the template. So i just went into the cacti templates and changed the references to Celsius to Fahrenheit and then went and changed to OID to the correct one. Did a delete from all the data and recreated the graphs but it is not graphing the Fahrenheit. Any ideas.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group