Dell Equallogic Group template

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Author
Message
argon0
Cacti User
Posts: 443
Joined: Fri Mar 12, 2004 1:22 pm

Re: Dell Equallogic Group template

#46 Post by argon0 » Fri Mar 16, 2012 3:44 pm

I wonder if you are doing enough for it to register...

Its not saying Nan so its getting some data.

Have you looked in Sanhq? That's free from Dell iirc.
[size=50]No longer a n00by but[/size] not yet an 0ldby

Now Head of Technology at RSCH, back to the prickly subject of Monitorring....

User avatar
mmartens
Cacti User
Posts: 110
Joined: Tue May 24, 2005 6:23 pm

Re: Dell Equallogic Group template

#47 Post by mmartens » Fri Mar 16, 2012 4:37 pm

Ok thanks for the reply

I'll have a look at SanHQ and post my findings.

Have a good weekend!

User avatar
mmartens
Cacti User
Posts: 110
Joined: Tue May 24, 2005 6:23 pm

Re: Dell Equallogic Group template

#48 Post by mmartens » Mon Mar 19, 2012 6:36 am

Hi I think it maches pretty good now.

thanks!
Attachments
19-3-2012 12-35-03.png
19-3-2012 12-35-03.png (12.85 KiB) Viewed 3542 times
19-3-2012 12-34-54.png
19-3-2012 12-34-54.png (26.5 KiB) Viewed 3542 times

argon0
Cacti User
Posts: 443
Joined: Fri Mar 12, 2004 1:22 pm

Re: Dell Equallogic Group template

#49 Post by argon0 » Mon Mar 19, 2012 7:18 am

That looks about right. Matches with my own experience.

Caution: In my experience some users will misinterpret the IOPS readings given by SANHQ and/or Cacti, not realising that SANHQ uses a sliding timescale/granularity, thus recent results have a very good level of granularity (30s or better), and older results (on the same graph) may have a poor level of granularity (60 minutes or worse), thus smoothing off IOPS spikes.

Cacti also suffers from the same issue, but the granularity is (IMHO) much more predictable....
[size=50]No longer a n00by but[/size] not yet an 0ldby

Now Head of Technology at RSCH, back to the prickly subject of Monitorring....

User avatar
mmartens
Cacti User
Posts: 110
Joined: Tue May 24, 2005 6:23 pm

Re: Dell Equallogic Group template

#50 Post by mmartens » Mon Mar 19, 2012 7:24 am

Thanks for your reply.

What do you mean by: (IMHO)?

argon0
Cacti User
Posts: 443
Joined: Fri Mar 12, 2004 1:22 pm

Re: Dell Equallogic Group template

#51 Post by argon0 » Mon Mar 19, 2012 7:52 am

In My Humble Opinion....
[size=50]No longer a n00by but[/size] not yet an 0ldby

Now Head of Technology at RSCH, back to the prickly subject of Monitorring....

User avatar
mmartens
Cacti User
Posts: 110
Joined: Tue May 24, 2005 6:23 pm

Re: Dell Equallogic Group template

#52 Post by mmartens » Mon Mar 19, 2012 7:57 am

;-)

Thanks we will see how it goes.

User avatar
JorisFRST
Cacti User
Posts: 217
Joined: Mon Oct 02, 2006 1:22 pm
Location: Belgium
Contact:

Re: I have the same problem. Any resolution?

#53 Post by JorisFRST » Fri Jun 29, 2012 8:24 am

ewillems wrote:
  • Open Dell Equallogic Group Manager
  • Browse to Members
  • Select the first member and select Modify Member settings
  • Enter a description
Thanks, that sorted my problem, lost snmp on the devices when we put a new member in without a description :oops:
Joris.
http://www.routerjanitor.com

paulredpath
Posts: 3
Joined: Sun Feb 22, 2004 8:30 am

Re: Dell Equallogic Group template

#54 Post by paulredpath » Wed May 15, 2013 4:34 am

Hi

Great template, just wondering if anyone has included the interface stats for the controllers on each group member?

Ta

P

clicker666
Posts: 11
Joined: Mon Jan 23, 2006 3:49 pm

Re: Dell Equallogic Group template

#55 Post by clicker666 » Thu Apr 30, 2015 12:53 pm

I know this is a pretty old thread, but does anyone know how to pull the Temp sensors off of the backplane?

SNMPv2-SMI::enterprises.12740.2.1.6.1.2.1.847522647.2 = STRING: "Backplane sensor 0"
SNMPv2-SMI::enterprises.12740.2.1.6.1.2.1.847522647.3 = STRING: "Backplane sensor 1"

We're getting the processor, chipset and controller temps but these come back as 0. I believe they are the enclosure temps listed in the template. If you look at the example picture it shows their value as being 0 as well.

http://forums.cacti.net/viewtopic.php?p=227721#p227721

Eol
Posts: 44
Joined: Mon Apr 13, 2015 5:53 pm

Re: Dell Equallogic Group template

#56 Post by Eol » Thu Jun 04, 2015 8:53 pm

I guess it depends which temperature you are aiming for. For example on our PSM-4110 I can pull it with:

eqlMemberHealthDetailsTemperatureValue.1.154467931.[1-7]
.1.3.6.1.4.1.12740.2.1.6.1.3.1.154467931.7.1 [through] .7 which correspond to:

eqlMemberHealthDetailsTemperatureName.1.154467931.1 System
eqlMemberHealthDetailsTemperatureName.1.154467931.2 Backplane sensor 0
eqlMemberHealthDetailsTemperatureName.1.154467931.3 Backplane sensor 1
eqlMemberHealthDetailsTemperatureName.1.154467931.4 Control module 0 processor
eqlMemberHealthDetailsTemperatureName.1.154467931.5 Control module 0 chipset
eqlMemberHealthDetailsTemperatureName.1.154467931.6 Control module 1 processor
eqlMemberHealthDetailsTemperatureName.1.154467931.7 Control module 1 chipset

Now if you are asking me where "154467931" comes from, I got no idea .. maybe model identifier?

tosage
Cacti User
Posts: 154
Joined: Wed Jul 28, 2010 5:05 am
Location: France

Re: Dell Equallogic Group template

#57 Post by tosage » Mon Aug 03, 2015 2:00 pm

HY holobeer, if you pass here, a really good work !
It's function like a charm with my PS6100XV FW v7.1.7 !

Pleasure :D

David
Cacti Version - 0.8.8a
Plugin Architecture - 3.1
Poller Type - spine
Server Info - Linux
Web Server - Apache/2.2.22 (Ubuntu)
PHP - 5.3.10-1ubuntu3.6 with Suhosin-Patch (cli)
MySQL - 5.5.29-0ubuntu0.12.04.2
RRDTool - 1.4.7

Post Reply