Aerohive wireless template for ACSP neighbors

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Author
Message
ddunlap123
Posts: 20
Joined: Fri May 15, 2015 7:08 pm

Aerohive wireless template for ACSP neighbors

#1 Post by ddunlap123 » Thu Mar 02, 2017 8:41 am

The acsp zip file contains a Cacti template to determine the number of neighbor AP radios or AP radio/SSID combinations per Aerohive AP. Tracking changes in the number of neighbors would be useful in situations such where the radio power ceilings were adjusted, radios were turned off in the network, radio channels and/or power were toggled between manual and automatic adjustment. Graphically viewing this information will reflect results of the changes. There is also a script included to pull counts outside of Cacti.
This was tested on Cacti 0.8.8.h on Centos 6.7.
Attachments
graphpic.jpg
graphpic.jpg (161.7 KiB) Viewed 819 times
acsp.zip
(273.88 KiB) Downloaded 80 times

watchix
Posts: 4
Joined: Fri Aug 17, 2012 5:20 am

Re: Aerohive wireless template for ACSP neighbors

#2 Post by watchix » Tue Mar 05, 2019 5:05 am

Hi ddunlap123,

The "cacti.exp" is not ok.
It returns always 1 for the two radios.

Regards.
Attachments
Screen.jpg
Screen
Screen.jpg (105.43 KiB) Viewed 363 times

Post Reply