Cacti (home)ForumsDocumentation
Cacti: offical forums and support
It is currently Tue Mar 26, 2019 6:08 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Bits/sec and bytes/sec
PostPosted: Tue Apr 17, 2018 2:47 am 
Offline

Joined: Fri Feb 09, 2018 9:31 am
Posts: 45
hi cacti users.


I wonder. Does weathermap support bytes/sec?
and if not, how can i express an accurate representation of bytes/sec maximum bandwith in a link?
I tried guessing, if a gigabyte interface maximum bandwith is 100/1000, then i should multiply it by 8. making the maximum bandwith 8G bits/sec?
And if it's and redundant connection, it would make it max 16G bits/sec


Top
 Profile  
 
 Post subject: Re: Bits/sec and bytes/sec
PostPosted: Tue Apr 17, 2018 3:37 am 
Offline
Cacti Guru User
User avatar

Joined: Thu Sep 16, 2004 5:53 am
Posts: 5290
Location: United Kingdom
It depends what you mean by 'support'.

Internally weathermap assumes everything is in bits/sec. Since it normally calculates the relative usage between the measured value and the maximum, it doesn't really matter what the units are, as long as they are the same. You only have to worry about it if you want to label the link with a traffic value instead of a percentage.

SNMP typically uses octet counters, so by default weathermap multiplies the value read from the target by 8 to get bits/sec, if it's an rrd file. This works with Cacti, mrtg and many others.

Are you sure you have a gigabyte interface? That's a very unusual size, outside of fibrechannel storage. But anyway, what you care about is what is stored in the rrd file that you use as a target with weathermap. Is that in bits/sec or bytes/sec? A good clue is if you had to use a special template in Cacti to add the graph - if you just used the default 'Network Interface', then you don't need to add any special treatment.

Also, if you have a redundant connection (i.e. failover, not load-sharing), then you still have an 8G max, not 16G.

_________________
Weathermap 0.98 is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group