Cacti (home)ForumsDocumentation
Cacti: offical forums and support
It is currently Sat May 25, 2019 8:15 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: SNMP timeout on some devices - cacti 1.2.2
PostPosted: Mon Apr 08, 2019 10:13 am 
Offline

Joined: Mon Apr 01, 2019 10:48 am
Posts: 2
After upgrading to 1.2.2 I am getting random snmp timeouts and unable to add devices to cacti, however on the same devices snmpwalk from the same host works fine.
cacti doesn't give any other errors other than the snmp timeout.



2019/04/08 09:38:09 - SNMP WARNING: SNMP Error:'Timeout (500 ms)', Device:'x.x.4.22', OID:'.1.3.6.1.2.1.1.1.0'
2019/04/08 09:38:05 - SNMP WARNING: SNMP Error:'Timeout (500 ms)', Device:'x.x.4.22', OID:'.1.3.6.1.2.1.1.1.0'



]$ snmpwalk -v 3 -l authPriv -u snmpRO -a SHA -A *** -x AES -X *** x.x.4.22 .1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: Arista Networks EOS version 4.20.12M-INT running on an Arista Networks DCS-7280QR-C36-M


I only have 4 current devices in cacti right now, and trying to add others usually times out like this, but sometimes others just work. device configurations for snmp are all the same.


Top
 Profile  
 
 Post subject: Re: SNMP timeout on some devices - cacti 1.2.2
PostPosted: Mon Apr 15, 2019 7:18 am 
Offline
Cacti Guru User

Joined: Sun Aug 27, 2017 12:05 am
Posts: 2474
Since this is an SNMP v3 thing, there could be a bug somewhere, but just to be sure, what settings do you have against your device so that it can be compared to the above snmp walk.

_________________
Official Cacti Developer

Cacti Resources:
Cacti Website (including releases)
Cacti Issues
Cacti Development Releases
Cacti Development Documentation

My resources:
How to submit Pull Requests
Development Wiki and How To's
Updated NetSNMP Memory template for Cacti 1.x
Cisco SFP template for Cacti 0.8.8


Top
 Profile  
 
 Post subject: Re: SNMP timeout on some devices - cacti 1.2.2
PostPosted: Mon Apr 15, 2019 3:35 pm 
Offline

Joined: Mon Apr 01, 2019 10:48 am
Posts: 2
so update on this: not sure if it is a bug on device or cacti side of things, but when i remove/add the snmp settings from the device, it starts working.

This initially happened for a couple of new devices that were being added, however I then had a device that had been workign for a couple weeks suddenly show "Down" for status, and stopped graphing until I did the same thing on that device - remove/add snmp settings. then it started graphing again and showed "up".

Settings are the same for my snmp settings in cacti vs the snmpwalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group