UPS - Nut Monitor in Cacti

Addons for Cacti and discussion about those addons

Moderators: Moderators, Developers

Post Reply
Author
Message
Delta04
Posts: 1
Joined: Tue Nov 21, 2017 3:05 am

UPS - Nut Monitor in Cacti

#1 Post by Delta04 » Tue Nov 21, 2017 3:08 am

Hello,

Is there any solution to monitor an UPS directly attached to the server running cacti via NUT service?
I have tried Eric Hall addon (http://www.eric-a-hall.com/software/cacti-nut/) but it dows not work with cacti 1.1.27 and Php 7.1 on Ubuntu 16.04 LTS.

Thanks.

netniV
Cacti Guru User
Posts: 2872
Joined: Sun Aug 27, 2017 12:05 am

Re: UPS - Nut Monitor in Cacti

#2 Post by netniV » Fri Dec 15, 2017 8:20 pm

If you look at the page, it says you can run the scripts directly to test what occurs. It appears to be connecting to another port, and if that is on the same server it should normally work. So what you probably need to do is check that there is a process listening on that port using netstat.

If there is, test the scripts from command line to see what the output is.

jayray
Posts: 24
Joined: Sat May 01, 2004 11:01 pm

Re: UPS - Nut Monitor in Cacti

#3 Post by jayray » Thu May 24, 2018 7:31 pm

I'm necroing this thread.. I've been using this script for years with no issues until I added another UPS to my stack. I'm having an issue with indexing it seems. When I run a verbose query I get nothing. However the graphs I setup years ago work fine. I've tried running from shell, but it gives no output at all.. Very strange. Running in Arch with php7.2.3.

Post Reply