Cacti (home)ForumsDocumentation
Cacti: offical forums and support
It is currently Wed May 22, 2019 9:49 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Riverbed Steelhead Appliance - statistics
PostPosted: Fri Feb 09, 2007 4:53 am 
Offline
Cacti User

Joined: Fri Aug 18, 2006 11:22 am
Posts: 103
Location: MSK, RU
This set of templates could be used to monitor the following devices:

Riverbed Steelhead Appliance
- 510
- 1010
- 2010
- 3010
- 5010

HP StorageWorks Enterprise File Services WAN Accelerator
- DL320-1010 WAN Accelerator
- DL320-2010 WAN Accelerator
- DL320-510 WAN Accelerator
- DL380-3010 WAN Accelerator
- DL380-5010 WAN Accelerator

-----------------------------------------------------------

Known issues:

- CPU load OID is updated once per 1 minute while polling is performed once per 5 minutes.
- hitRate and missRate look reversed in MIB. dimension is unclear.

-----------------------------------------------------------

Suggestions and modifications are strongly welcomed!

For those interested I also attach Riverbed MIB file.


Attachments:
optimisation.png
optimisation.png [ 33.65 KiB | Viewed 37226 times ]
load.average.png
load.average.png [ 19.91 KiB | Viewed 37226 times ]
data.store.png
data.store.png [ 28.96 KiB | Viewed 37226 times ]
cpu.load.png
cpu.load.png [ 21.81 KiB | Viewed 37226 times ]
connections.png
connections.png [ 40.75 KiB | Viewed 37226 times ]
Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 09, 2007 4:56 am 
Offline
Cacti User

Joined: Fri Aug 18, 2006 11:22 am
Posts: 103
Location: MSK, RU
tail...


Attachments:
steelhead-mib.txt [17.59 KiB]
Downloaded 4789 times
rbt-mib.txt [413 Bytes]
Downloaded 3138 times
Riverbed-Graph.templates-09.02.2007.rar [15.76 KiB]
Downloaded 3010 times
passthrough.png
passthrough.png [ 46.04 KiB | Viewed 37226 times ]
Top
 Profile  
 
 Post subject: What version
PostPosted: Thu Jun 21, 2007 9:58 pm 
Offline

Joined: Thu Jun 21, 2007 9:57 pm
Posts: 1
What version of Cacti did you create these templates from?

Thanks


Top
 Profile  
 
 Post subject: Riverbed
PostPosted: Fri Aug 10, 2007 1:49 pm 
Offline

Joined: Fri Aug 10, 2007 8:32 am
Posts: 1
Can you be a more specific on how to install this?

Thanks!


Top
 Profile  
 
 Post subject: XML Error
PostPosted: Sat Aug 11, 2007 8:34 pm 
Offline

Joined: Tue Mar 28, 2006 2:40 am
Posts: 24
I keep getting the below mentioned error message each time i try to import the XML file.

Error:XML:Hash version does not exist

can someone pls advice on this issue?

thank you!


Top
 Profile  
 
 Post subject: Re: What version
PostPosted: Thu Aug 16, 2007 10:57 am 
Offline
Cacti User

Joined: Fri Aug 18, 2006 11:22 am
Posts: 103
Location: MSK, RU
habenero wrote:
What version of Cacti did you create these templates from?

Thanks

0.8.6h as I remember now.


Top
 Profile  
 
 Post subject: Re: Riverbed
PostPosted: Thu Aug 16, 2007 10:58 am 
Offline
Cacti User

Joined: Fri Aug 18, 2006 11:22 am
Posts: 103
Location: MSK, RU
jesterman wrote:
Can you be a more specific on how to install this?

Thanks!

Just as any other graph templates. No other files required.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 29, 2007 2:03 am 
Offline

Joined: Sun Sep 10, 2006 1:05 am
Posts: 34
All my graphs work fine, except for the DataStore and Passthrough... They seem to not get data (Current: -1.#J)


I did not change anything in the template like OIDs... using it exactly as posted.

We have the Riverbed Steelhead 5010 devices with firmware 4.04:
rbt_sh 4.0.4a #76_2 2007-10-10 18:40:27 i386

Any ideas? (2nd attachment posted just to show we have data for other OIDs)


Attachments:
rbtpass.png
rbtpass.png [ 21.35 KiB | Viewed 34718 times ]
rbtopt.png
rbtopt.png [ 33.34 KiB | Viewed 34718 times ]
File comment: Datastore
rbtds.png
rbtds.png [ 21.63 KiB | Viewed 34718 times ]
Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 29, 2007 5:34 am 
Offline

Joined: Sun Sep 10, 2006 1:05 am
Posts: 34
Nevermind....
I noticed my Devices were set up with SNMP v1.
I changed this to v2 and all is working fine now.

Thanks anyways! Great Template!


Top
 Profile  
 
 Post subject: Aggregate Bandwidth - template
PostPosted: Tue Dec 04, 2007 11:31 am 
Offline
Cacti User
User avatar

Joined: Fri Feb 17, 2006 9:02 pm
Posts: 112
Location: Massachusetts, USA
I've attached a template for Aggregate Bandwidth on Riverbed Steelheads, tested with Steelhead 1520's and 3520's.

Thanks,
nebj00la


Attachments:
File comment: Screenshot
stlhd.aggregate.png
stlhd.aggregate.png [ 23.58 KiB | Viewed 34312 times ]
cacti_graph_template_riverbed_aggregate_bandwidth.xml [27.3 KiB]
Downloaded 2062 times

_________________
Thanks,
nebj00la
Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 03, 2008 11:45 pm 
Offline

Joined: Thu Jul 03, 2008 11:43 pm
Posts: 1
Do you know of a way to chart the amount of optimized WAN output?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 01, 2008 2:28 pm 
Offline

Joined: Wed Oct 01, 2008 2:25 pm
Posts: 1
loganbra wrote:
Do you know of a way to chart the amount of optimized WAN output?

How about looking at the throughput / utilisation stats on the interface (ifIndex). Maybe map LAN against WAN interface to see data coming in as compare to data going out!?
Just a suggestion!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 06, 2009 4:48 pm 
Offline

Joined: Fri Jan 30, 2009 12:56 pm
Posts: 25
I don't know why, but when I imported the templates the data sources for "missTotal" were set to type GAUGE when they should be COUNTER.

FYI, YMMV, etc...


Top
 Profile  
 
 Post subject: Temperature
PostPosted: Thu Jun 18, 2009 12:33 pm 
Offline

Joined: Thu Jun 18, 2009 12:31 pm
Posts: 1
I want to graph the temperature readings from my Steelheads. Anybody know how to do this?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 06, 2009 9:29 am 
Offline

Joined: Mon Jul 06, 2009 9:21 am
Posts: 25
I successfully implemented the CPU load and the connection graphs but I have an issue on the interface polling. It works and I can have graphs on the interfaces of my riverbed but from time to time, Cacti is not able to do it and I have the following warning logs:


[code]07/06/2009 03:12:29 PM - SPINE: Poller[0] Host[35] DS[522] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[522] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[515] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[516] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[517] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[518] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[519] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[520] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[520] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[521] WARNING: SNMP timeout detected [500 ms], ignoring host
07/06/2009 03:12:27 PM - SPINE: Poller[0] Host[35] DS[521] WARNING: SNMP timeout detected [500 ms], ignoring host [/code]

I have a riverbed 5050 with 5.5.1b version and my cacti runs with 0.8.7b and 0.8.7c (we have two differents servers - one for dev, one for prod). The poller used in Cacti is "spine" configured to do a polling every 1 minutes.

Someone got this issue before?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group