Hi Dionvdc
hoping you are still following this thread...or anyone you have got spiral some nice spiral/circular graph..
I got able to get graph but wonder how I get link's label shows data better... like Dionvdc got..
following in portion of my config:
Quote:
NODE rrr1
LABEL rrr1
ICON images/router_up.gif
POSITION VPLS10 90r300
NODE rrr1-1
LABEL rrr1-1
ICON images/router_up.gif
POSITION VPLS10 98r300
NODE rrr1-2
LABEL rrr1-2
ICON images/router_up.gif
POSITION VPLS10 106r300
NODE rrr1-3
LABEL rrr1-3
ICON images/router_up.gif
POSITION VPLS10 114r300
NODE rrr1-4
LABEL rrr1-4
ICON images/router_up.gif
POSITION VPLS10 122r300
LINK VPLS10-rrr1
NODES VPLS10:90r65 rrr1
LINK VPLS10-rrr1-1
NODES VPLS10:98r65 rrr1-1
LINK VPLS10-rrr1-2
NODES VPLS10:106r65 rrr1-2
LINK VPLS10-rrr1-3
NODES VPLS10:114r65 rrr1-3
LINK VPLS10-rrr1-4
NODES VPLS10:122r65 rrr1-4
dionvdc wrote:
My turn with images that represent one of our storage layout.
Setup used: cacti 0.8.7e, weather-map 0.97, monitor and thold.
Link have an infourl and overlib as do the switch endpoints, some links have an in/out infourl and overlib defined. Set link_bulge is used.
The monitor is to be used as an animated weathermap infourl/ overlib, but this is still an WIP.
The first two image configfiles are made with an xls file using previous posted file for the dashboard creation as example. The last two where created by hand.
The config (especially the radial images) files contain almost no Configuration Directives except many set hint values as almost everything is templated and defined in an include files.
The last two images use the same include file mentioned above for templates and a seperate one for the base layout. The base switches have an overlib and infourl to the radial images