Advanced Ping graph is empty

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Moderators, Developers

Post Reply
Author
Message
jinju
Posts: 2
Joined: Tue Jun 14, 2016 4:22 am

Advanced Ping graph is empty

#1 Post by jinju » Thu Jul 04, 2019 3:43 am

Graph of advanced Ping template is empty for some of the device and it was working fine earlier. There is no issue if i user Unix - Ping Latency. How can i resolve it. Please help me.

jinju
Posts: 2
Joined: Tue Jun 14, 2016 4:22 am

Re: Advanced Ping graph is empty

#2 Post by jinju » Mon Jul 15, 2019 7:10 am

Jinju wrote:Graph of advanced Ping template is empty for newly created devices. There is no issue for existing ones (earlier). There is no issue if I user Unix - Ping Latency. How can I resolve it? Please help me.
Anybody, please help me with it. I have attached here the screenshot of a blank graph. I'm using "PING - Advanced Ping v1.4" graph template.

1) Please find the debug command below.

RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start='0' \
--end='0' \
--title='Test.VPN - Advanced Ping' \
--base='1000' \
--height='120' \
--width='500' \
--upper-limit='10' \
--lower-limit='0' \
--units-exponent='1' \
--vertical-label='milliseconds' \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a='/usr/share/cacti/rra/test_vpn_dev_1093.rrd':'min':AVERAGE \
DEF:b='/usr/share/cacti/rra/test_vpn_dev_1093.rrd':'avg':AVERAGE \
DEF:c='/usr/share/cacti/rra/test_vpn_dev_1093.rrd':'max':AVERAGE \
DEF:d='/usr/share/cacti/rra/test_dev_1093.rrd':'loss':AVERAGE \
DEF:e='/usr/share/cacti/rra/test_vpn_dev_1093.rrd':'dev':AVERAGE \
CDEF:cdefg='d,0,GT,d,2,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefh='d,3,GT,d,5,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefi='d,5,GT,d,10,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefj='d,10,GT,d,15,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefba='d,15,GT,d,50,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefbb='d,50,GT,d,95,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefbc='d,95,GT,d,100,GT,UNKN,INF,IF,UNKN,IF' \
CDEF:cdefbd='d,UN,1,EQ,TIME,300,+,NOW,GT,UNKN,INF,IF,d,95,GT,INF,UNKN,IF,IF' \
CDEF:cdefbf='e,2,/' \
CDEF:cdefbh='c,b,-,e,-,3,/' \
CDEF:cdefcd='d,0,GT,d,2,GT,UNKN,a,IF,UNKN,IF' \
CDEF:cdefce='d,3,GT,d,5,GT,UNKN,a,IF,UNKN,IF' \
CDEF:cdefcf='d,5,GT,d,10,GT,UNKN,a,IF,UNKN,IF' \
CDEF:cdefcg='d,10,GT,d,15,GT,UNKN,a,IF,UNKN,IF' \
CDEF:cdefch='d,15,GT,d,50,GT,a,INF,IF,UNKN,IF' \
CDEF:cdefci='d,50,GT,d,95,GT,UNKN,a,IF,UNKN,IF' \
CDEF:cdefcj='d,95,GT,d,100,GT,UNKN,a,IF,UNKN,IF' \
LINE1:a:'' \
LINE1:b:'' \
LINE1:c:'' \
LINE1:d:'' \
LINE1:e:'' \
COMMENT:' Pkt Loss\:' \
AREA:cdefg#AFECEDFF:'1-2%' \
AREA:cdefh#55D6D3FF:'3-5%' \
AREA:cdefi#7CB3F1FF:'6-10%' \
AREA:cdefj#4668E4FF:'11-15%' \
AREA:cdefba#A150AAFF:'16-50%' \
AREA:cdefbb#FF00FFFF:'51-95%' \
AREA:cdefbc#F51D30FF:'96-100%' \
COMMENT:'Unknown\n' \
AREA:b#FFFFFFFF:'' \
AREA:cdefbf#333333FF:'':STACK \
AREA:cdefbf#555555FF:'':STACK \
AREA:cdefbh#888888FF:'':STACK \
AREA:cdefbh#AAAAAAFF:'':STACK \
AREA:cdefbh#CCCCCCFF:'':STACK \
GPRINT:d:AVERAGE:' Avg Loss\:%6.2lf%%' \
GPRINT:d:MAX:'Max Loss\:%6.2lf%%\n' \
COMMENT:' Latency\:' \
AREA:cdefcd#AFECEDFF:'' \
AREA:cdefce#55D6D3FF:'' \
AREA:cdefcf#7CB3F1FF:'' \
AREA:cdefcg#4668E4FF:'' \
AREA:cdefch#A150AAFF:'' \
AREA:cdefci#FF00FFFF:'' \
AREA:cdefcj#F51D30FF:'' \
GPRINT:a:AVERAGE:'Min\:%8.2lf ms' \
GPRINT:b:AVERAGE:'Avg\:%8.2lf ms' \
GPRINT:c:MAX:'Max\:%8.2lf ms' \
GPRINT:e:AVERAGE:'Dev\:%8.2lf ms\n' \
COMMENT:'Avg Latency\:' \
LINE1:b#00BD27FF:'
'

RRDTool Says:

OK
Attachments
graph.jpg
graph.jpg (54.73 KiB) Viewed 466 times

Post Reply