cacti graph do not show real value

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Moderators, Developers

Post Reply
Author
Message
Ahmed1993
Posts: 7
Joined: Mon Jul 08, 2019 8:11 am

cacti graph do not show real value

#1 Post by Ahmed1993 » Thu Jul 11, 2019 9:09 am

hi everyone
I have installed cacti to monitor interface bandwidth on some cisco devices but I noticed that cacti graph do not show real values , not even close , the output of #sh int command on one switch interface give me values between 150 to 185 Mpbs while cacti graph show values with maximum 90 Mbps and sometimes fall to 10 Mbps realtime graph for this interface also show very high values over 200 Mbps
I set counters to U (maximum) but nothing change so what should I do?????

Ahmed1993
Posts: 7
Joined: Mon Jul 08, 2019 8:11 am

Re: cacti graph do not show real value

#2 Post by Ahmed1993 » Sun Jul 14, 2019 5:40 am

sorry for that
seems like it was a problem of counters , 64 bit counters solved the problem

Post Reply