Templates to Cisco uBR (SNR, FEC, Modems Ups, Interf Utiliz)

Message

Spark · #1 Post by **Spark** » Thu Nov 17, 2005 1:08 pm

Hi all,
I made some templates Cisco uBR, the templates are:

Edited 1/12/2005

Interface Upstream SNR/FEC
Interface Upstream SNR
Interface Upstream Modems per Upstream
Interface Upstream Utilization
Interface Upstream UGS
Interface Utilization

You need to put in cacti/resource/snmp_queries/ the files:
snmp_queries/cable_interface_bw.xml
snmp_queries/modem_upstreams.xml
snmp_queries/upstream_fec.xml
snmp_queries/upstream_ugs_utilization.xml
snmp_queries/upstream_utilization.xml
snmp_queries/upstream_snr.xml (changed from upstreams_snr.xml to upstream_snr.xml)

And import template:
cacti_data_query_snmp_fec_upstream.xml
cacti_data_query_snmp_interface_bandwidth_utilization.xml
cacti_data_query_snmp_modems_per_upstreams.xml
cacti_data_query_snmp_ugs_upstream.xml
cacti_data_query_snmp_upstreams_snr.xml
cacti_data_query_snmp_upstreams_utilization.xml

The files have all the dependecies (Graph Templates, etc)

Exported from Version 0.8.6g and tested in a new instalation "Version 0.8.6g" and its working.

I hope its working for you ppl

Another change to see all the name, title etc... in Settings/Visual:
Graph Management
Maximum Title Length = 100 or more
Data Queries
Maximum Field Length = 100 or more
Data Sources
Maximum Title Length = 100 or more

#
You can check this Doc to understand better de SNR and FEC:
http://www.cisco.com/en/US/tech/tk86/tk ... 1a71.shtml
#

Thanks

Graph

Spark · #2 Post by **Spark** » Thu Nov 17, 2005 1:10 pm

More graphs

qhasxeem · #3 Post by **qhasxeem** » Thu Nov 17, 2005 5:29 pm

Sorry I'm just a noob cacti user.

1. I placed the XML files in my {HOME}/cacti/resource/snmp_queries folder
2. Then I used CACTI --> Import Templates --> and imported all the templates with cacti*.

3. Then what?

I'm not seeing the templates in cacti? Am I missing a step?

Spark · #4 Post by **Spark** » Fri Nov 18, 2005 6:53 am

Hi,
Than you can add devices

The files to put in {HOME}/cacti/resource/snmp_queries folder is:

snmp_queries/cable_interface_bw.xml
snmp_queries/modem_upstreams.xml
snmp_queries/upstream_fec.xml
snmp_queries/upstream_ugs_utilization.xml
snmp_queries/upstream_utilization.xml
snmp_queries/upstream_snr.xml (changed from upstreams_snr.xml to upstream_snr.xml)

And import template:
cacti_data_query_snmp_fec_upstream.xml
cacti_data_query_snmp_interface_bandwidth_utilization.xml
cacti_data_query_snmp_modems_per_upstreams.xml
cacti_data_query_snmp_ugs_upstream.xml
cacti_data_query_snmp_upstreams_snr.xml
cacti_data_query_snmp_upstreams_utilization.xml

I will test the templates in a new cacti instalation to check if are errors

Thanks

speed · #5 Post by **speed** » Tue Nov 22, 2005 3:57 pm

I'm trying to import these into Version 0.8.6g and there's no error, but none of these seem to import. Any thoughts on this?

Thanks

Spark wrote:Hi all,
I made some templates Cisco uBR, the templates are:

Interface Upstream SNR/FEC
Interface Upstream SNR
Interface Upstream Modems Upstream
Interface Upstream Utilization
Interface Upstream UGS
Interface Utilization

You need to put in cacti/resource/snmp_queries/ the files:
cable_interface_bw.xml
modem_upstreams.xml
upstream_fec.xml
upstream_ugs_utilization.xml
upstream_utilization.xml
upstreams_snr.xml

And import template:
cacti_graph_template_interface_downstream_bw.xml
cacti_graph_template_interface_modems_por_upstream.xml
cacti_graph_template_interface_ugs.xml
cacti_graph_template_interface_upstream_fec.xml
cacti_graph_template_interface_upstream_snr.xml
cacti_graph_template_interface_upstream_utilization.xml

Exported from Version 0.8.6e

Thanks

Graph

Spark · #6 Post by **Spark** » Thu Nov 24, 2005 4:55 am

Hi, I try and have the same problem.....
I will upgrade the cacti and export again from Version 0.8.6g

Thanks

ashvillerob · #7 Post by **ashvillerob** » Fri Nov 25, 2005 6:21 pm

Sparc-

Have you had a chance to upgrade Cacti and "re" export your templates yet. I would really like to try them also?

Thanks!

swen · #8 Post by **swen** » Mon Nov 28, 2005 9:58 am

Same here, I try to import the templates with 0.8.6f but no go. Tried to paste and also the browse way, but neither works. I really like to have this too.

Thanks,
- Swen

ashvillerob · #9 Post by **ashvillerob** » Wed Nov 30, 2005 4:01 pm

I got tired of waiting and finally made my own SNR templates that I will share if anyone wants them. There are two issues though.

Number 1.....I have a mixture of line cards throughout my network (1x6S, 1x6U, 2x8U, and 5x20S) so I had to make several different data templates.

Number 2..... Since I did not know any other method to do this, I actually made an individual data template for every possible US interface which is used to poll the specefic mib for that interface. For example on a 1x6 card I made 24 seperate data templates to gather the data. Then I created a new Graph template for each line card and used the 6 coresponding data templates for the US SNR data source for each graph. So I end up with one graph for each line card which graphs all the related US interfaces SNR.

Again this is a lot of templates. Somewhere around 70. So I would encourage you to make your own from scratch rather than trying to figure mine out. I am sure there is a much, much simplier way. I am just not familiar with how to create a xml file to do this all in one step.

Spark · #10 Post by **Spark** » Wed Nov 30, 2005 6:03 pm

Hi,
Yes more one day and I upload all the templates

Sorry :O

Thanks

Spark · #11 Post by **Spark** » Thu Dec 01, 2005 6:03 pm

Hi,

I update the templates and you can try, I try and test with a new instalation Version 0.8.6g and works good

Templates:
http://forums.cacti.net/download.php?id=3886

Thanks

cliff · #12 Post by **cliff** » Thu May 18, 2006 2:05 pm

These templates work greate except it cuts off on Upstream# at upstre.
So if I had a graph it would be titled like this
"area name - UBR - SNR - Cable1/0-upstre" it doesn't add the upstream port number. Did you do anything special to fix this?

cliff · #13 Post by **cliff** » Thu May 18, 2006 2:11 pm

If only I would have read your original post further. I fixed this by adding 100 to the field lengths. It works great. THANKS!

rrobbinstx · #14 Post by **rrobbinstx** » Thu Sep 07, 2006 10:34 pm

All the graphs work great but I am also looking for a downstream utilization graph. Can anyone help?

fbrockerhoff · #15 Post by **fbrockerhoff** » Mon Oct 16, 2006 6:25 am

Hello,

I'm using Cacti 0.8.6c (Debian) and tried to import the templates, but got an error. I'm clicking on "Import Template", choosed the (local on my laptop based) first xml-file in the unzipped archiv and clicked on 'save'. Then an error message appeard: 'Error: XML: Hash version does not exist.'.

Any idea what I did wrong? EDIT: Does the templates only work with the cacti version they're taken from?

Regards,

Falk

Templates to Cisco uBR (SNR, FEC, Modems Ups, Interf Utiliz)

Templates to Cisco uBR (SNR, FEC, Modems Ups, Interf Utiliz)

Re: Templates to Cisco uBR (SNR, FEC, Modems Ups, Intf. Uti)

Have you had a chance?

Works Great