Cacti (home)ForumsDocumentation
Cacti: offical forums and support
It is currently Fri May 24, 2019 10:13 am

All times are UTC - 5 hours




Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Extreme Networks XOS CPU monitoring
PostPosted: Fri Aug 03, 2007 5:59 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi

Has anyone had any luck monitoring CPU on Extreme Networks XOS based switches (BD8810, X450's) ?? I'm running various versions of XOS on the network. I'm currently trying to get this working with a BD8810 running 12.0.1.11

I have the mib file installed. Looking at the mib the OID for extremeCpuAggregateUtilization - 1.3.6.1.4.1.1916.1.1.1.28 I don't get any data back from an SNMPWALK

C:\net-snmp\bin>snmpwalk -v 2c -c public 172.27.7.240 1.3.6.1.4.1.1916.1.1.1.2
8
SNMPv2-SMI::enterprises.1916.1.1.1.28.0 = INTEGER: 0

I have then tried to walk the extremeCpuTask2Table

-- OID extremeSystemCommon.24 has been deprecated and extremeCpuTasktable
-- has been moved to extremeSystemCommon.29 with new name extremeCpuTask2table


-- The CPU Task table lists all executing tasks
--
extremeCpuTask2Table OBJECT-TYPE
SYNTAX SEQUENCE OF ExtremeCpuTask2Entry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of CPU tasks that are active."
::= { extremeSystemCommon 29 }


OID - 1.3.6.1.4.1.1916.1.1.1.29


C:\net-snmp\bin>snmpwalk -v 2c -c public 172.27.7.240 1.3.6.1.4.1.1916.1.1.1.2
9
SNMPv2-SMI::enterprises.1916.1.1.1.29 = No Such Object available on this agent a
t this OID


I can do a full snmpwalk for 1.3.6.1.4.1.1916.1.1.1 as shown

C:\net-snmp\bin>snmpwalk -v 2c -c public 172.27.7.240 1.3.6.1.4.1.1916.1.1.1
SNMPv2-SMI::enterprises.1916.1.1.1.3.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.4.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.5.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.6.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.7.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.8.0 = INTEGER: 31
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.101 = INTEGER: 101
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.102 = INTEGER: 102
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.103 = INTEGER: 103
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.104 = INTEGER: 104
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.105 = INTEGER: 105
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.106 = INTEGER: 106
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.107 = INTEGER: 107
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.108 = INTEGER: 108
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.1.109 = INTEGER: 109
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.101 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.102 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.103 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.104 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.105 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.106 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.107 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.108 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.2.109 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.101 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.102 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.103 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.104 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.105 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.106 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.107 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.108 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.9.1.3.109 = INTEGER: 39
SNMPv2-SMI::enterprises.1916.1.1.1.10.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.11.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.12.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.13.0 = STRING: "12.0.1.11"
SNMPv2-SMI::enterprises.1916.1.1.1.14.0 = STRING: "12.0.1.11"
SNMPv2-SMI::enterprises.1916.1.1.1.15.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.16.0 = STRING: "800128-00-03 07155-00977"
SNMPv2-SMI::enterprises.1916.1.1.1.17.0 = ""
SNMPv2-SMI::enterprises.1916.1.1.1.18.0 = ""
SNMPv2-SMI::enterprises.1916.1.1.1.19.0 = ""
SNMPv2-SMI::enterprises.1916.1.1.1.20.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.21.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.22.0 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.23.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.25.0 = STRING: "1.0.1.11"
SNMPv2-SMI::enterprises.1916.1.1.1.26.0 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.1 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.2 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.3 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.4 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.5 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.2.6 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.1 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.2 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.3 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.4 = INTEGER: 4
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.5 = INTEGER: 4
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.3.6 = INTEGER: 4
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.1 = INTEGER: 27
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.2 = INTEGER: 29
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.3 = INTEGER: 31
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.4 = INTEGER: 33
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.5 = INTEGER: 35
SNMPv2-SMI::enterprises.1916.1.1.1.27.1.5.6 = INTEGER: 37
SNMPv2-SMI::enterprises.1916.1.1.1.28.0 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.31.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.32.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.33.0 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.1.2 = INTEGER: 2
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.1.3 = INTEGER: 3
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.2.1 = INTEGER: 12
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.2.2 = INTEGER: 12
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.2.3 = INTEGER: 12
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.3.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.3.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.3.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.4.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.4.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.4.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.5.1 = INTEGER: 11
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.5.2 = INTEGER: 11
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.5.3 = INTEGER: 11
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.6.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.6.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.6.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.7.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.7.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.7.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.8.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.8.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.8.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.9.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.9.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.9.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.10.1 = STRING: "ExtremeXOS version 12.0.
1.11 v1201b11 by release-manager on Fri May 18 20:51:13 PDT 2007"
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.10.2 = STRING: "ExtremeXOS version 12.0.
1.11 v1201b11 by release-manager on Fri May 18 20:51:13 PDT 2007"
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.10.3 = STRING: "ExtremeXOS version 12.0.
1.11 v1201b11 by release-manager on Fri May 18 21:13:08 PDT 2007"
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.11.1 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.11.2 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.11.3 = INTEGER: 0
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.12.1 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.12.2 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.34.1.12.3 = INTEGER: 1
SNMPv2-SMI::enterprises.1916.1.1.1.36.0 = INTEGER: 3
SNMPv2-SMI::enterprises.1916.1.1.1.37.0 = Counter64: 1185628971



I can see that CPU monitoring is enabled on the switch.


pavcr-8810-1.1 # sh cpu-monitoring

CPU Utilization Statistics - Monitored every 20 seconds
-------------------------------------------------------------------------------

Card Process 5 10 30 1 5 30 1 Max Total
secs secs secs min mins mins hour User/System
util util util util util util util util CPU Usage
(%) (%) (%) (%) (%) (%) (%) (%) (secs)
-------------------------------------------------------------------------------

MSM-A System n/a n/a 6.1 27.2 31.7 34.6 33.9 99.0
MSM-B System n/a n/a 0.0 0.0 0.0 0.0 0.0 1.8
MSM-A aaa n/a n/a 0.0 0.0 0.0 0.0 0.0 1.8 4.81 2.74
MSM-A acl n/a n/a 0.0 0.0 0.0 0.0 0.0 1.8 3.88 1.45


etc etc .......



Has anyone out there had any luck with monitoring the CPU of XOS switches???

Regards

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Last edited by jay on Tue Aug 07, 2007 10:42 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 07, 2007 10:37 am 
Offline

Joined: Sun Jul 29, 2007 2:12 pm
Posts: 12
We have the same problem at work.

X200 Switches running Extremeware returns CPU usage correctly

X250, X450 and BD8810 running Extreme OS returns '0' for CPU usage.

I think Extreme Networks may change the oid in wich CPU usage exports OR there's a bug in actual Extreme OS revision that the CPU usage didn't export at all.

Looking for a solution too... :o


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 07, 2007 10:45 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
I'll raise a TAC with Extreme and see what they see. I'll let you know the response when I get it.

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 16, 2007 6:59 am 
Offline

Joined: Sun Jul 29, 2007 2:12 pm
Posts: 12
Did you receive an explanation from Extreme Networks?

Regards.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 16, 2007 7:01 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
oooops. Knew there was something I needed to do :o(

I will get a TAC raised this afternoon and I will update the post as soon as I hear anything.

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 18, 2007 2:59 pm 
Offline

Joined: Sat Feb 03, 2007 1:07 am
Posts: 19
Location: Coral Gables, FL
Did you try .1.3.6.1.4.1.1916.1.32.1.4.1.9.11?

I used that for just a basic 0-100% utilization graph on an X450 and an 8810 that I had out for demo about 9 months ago.

A lot of the other OIDs I believe are deprecated from ExtremeWare. At least that was the explanation I recall when I inquired about it sometime ago. I could probably dig back in email and find the full explanation. As I recall the XOS docs make reference to that, but not in a very obvious way.

I've attached the template that I used. I only tried it under 11.6 and 12.0 beta on an X450, and 11.6 on an 8810, but it worked fine and reported accurate results on both versions.

I have another one that does internal temperature if anyone is interested.

-Tom


Attachments:
File comment: XOS CPU graph template
cacti_graph_template_extreme_networks_cpu_utilization.xml [10.35 KiB]
Downloaded 1362 times
Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 20, 2007 6:41 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi Tom

Excellent work. You have just pointed me in the right direction. I have just been looking at the MIB table for 12.0.1.11 and I can see where you get the OID from.

--
-- The CPU System table lists cpu utilization history for system processes on each slot
--
extremeCpuMonitorSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtremeCpuMonitorSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of CPU utilization for system processes."
::= { extremeSwMonitorCpu 4 }


This works for me on a number of BD8810 and X4540's running XOS 12.0.1.11, 11.6.2.9, 11.4.4.7 and also 11.4.3.4

I have yet to download the template and use it yet though.


Bd8810 running 12.0.1.11

C:\net-snmp\bin>snmpwalk -v 2c -c public BD8810 .1.3.6.1.4.1.1916.1.32.1
.4.1
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.1.11 = Gauge32: 11
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.5.11 = STRING: "n/a"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.6.11 = STRING: "n/a"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.7.11 = STRING: "9.5"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.8.11 = STRING: "29.5"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.9.11 = STRING: "29.5"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.10.11 = STRING: "29.5"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.11.11 = STRING: "32.4"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.12.11 = STRING: "99.9"


pavcr-8810-1.2 # show cpu-monitoring

CPU Utilization Statistics - Monitored every 20 seconds
-------------------------------------------------------------------------------

Card Process 5 10 30 1 5 30 1 Max Total
secs secs secs min mins mins hour User/System
util util util util util util util util CPU Usage
(%) (%) (%) (%) (%) (%) (%) (%) (secs)
-------------------------------------------------------------------------------

MSM-A System n/a n/a 13.1 34.4 35.1 37.6 33.7 99.9



X450 running 11.4.4.7

C:\net-snmp\bin>snmpwalk -v 2c -c public X450 .1.3.6.1.4.1.1916.1.32.
1.4.1
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.1.1 = Gauge32: 1
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.5.1 = STRING: "n/a"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.6.1 = STRING: "n/a"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.7.1 = STRING: "0.1"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.8.1 = STRING: "0.8"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.9.1 = STRING: "0.3"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.10.1 = STRING: "0.2"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.11.1 = STRING: "0.1"
SNMPv2-SMI::enterprises.1916.1.32.1.4.1.12.1 = STRING: "4.6"



muchB1FGB-x450-1.6 # sh cpu-monitoring

CPU Utilization Statistics - Monitored every 20 seconds
-----------------------------------------------------------------------

Process 5 10 30 1 5 30 1 Max Total
secs secs secs min mins mins hour User/System
util util util util util util util util CPU Usage
(%) (%) (%) (%) (%) (%) (%) (%) (secs)
-----------------------------------------------------------------------

System n/a n/a 0.0 0.0 0.0 0.1 0.2 4.6




I will look into seeing if I can create a template where you can monitor the CPU of individual processes. I will post as soon as I have created this.

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 20, 2007 9:50 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi

What I have noticed is that if you use 1.3.6.1.4.1.1916.1.32.1.4.1.9.11 it only allows you to monitor CPU for the BD's as 11 is the slot id for MSM-A. When you walk the OID for an X450 it gives the ID as 1 so you would need 2 data and graph templates or 1 data with both OIDS in there and 1 graph template. I'm currently testing the latter. I will post if successful.

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 20, 2007 5:55 pm 
Offline

Joined: Sat Feb 03, 2007 1:07 am
Posts: 19
Location: Coral Gables, FL
That's a good point. I could have sworn I did than on an X450, but thinking back, I had the X450s earlier, I may have mucked with the template and changed the OID for the 8810. I never really used these in production, I just did a quick check to make sure I could monitor what I wanted to monitor and that was the last I looked at it.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 21, 2007 10:22 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi

Just to let you know I'm in the process of testing new CPU and Memory templates. I have created data queries so you can reference the correct index rather than having to create multiple data and graph templates for each device.

I will post these as soon as I'm happy they are working correctly.

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 4:30 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi

I have just posted the new templates for CPU and Memory usage for XOS based switches. See http://forums.cacti.net/viewtopic.php?p=108717#108717

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 22, 2007 8:36 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
I have just had a look at creating a CPU template to monitor individual processes on XOS switches but it looks like the processname isn't readable within SNMP


C:\net-snmp\bin>snmpwalk -v 2c -c public 172.27.7.240 .1.3.6.1.4.1.1916.1.32.1
.3.1.2
SNMPv2-SMI::enterprises.1916.1.32.1.3.1.2 = No Such Object available on this age
nt at this OID


Looking at the MIB for 12.0.1.11 this isn't accessible


extremeCpuMonitorProcessName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name associated with the reported process id."
::= { extremeCpuMonitorEntry 2 }


Not worth creating the templates without the process name as the ID doesn't mean a thing and you can't see what the ID is on the switch itself. I'll ask Extreme about this. "SIGH"

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject:
PostPosted: Thu Aug 30, 2007 6:34 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Response from our Extreme Systems Engineer regarding getting the process name added to XOS.

"Features are fixed for the next two releases of code. Once the request has been scoped I will know more about timescales"

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
 Post subject: Re: Extreme Networks XOS CPU monitoring
PostPosted: Mon Nov 01, 2010 11:05 am 
Offline

Joined: Mon Nov 01, 2010 10:58 am
Posts: 1
Hi Folks,

I have been reading this post and it has been very helpful; I am looking for chassis temperature for a BD8810

Many thanks for you help on this

--SherbertPunt


Top
 Profile  
 
 Post subject: Re: Extreme Networks XOS CPU monitoring
PostPosted: Mon Nov 01, 2010 11:10 am 
Offline
Cacti User

Joined: Wed Aug 31, 2005 8:55 am
Posts: 390
Location: Bristol, England
Hi

This may be what you are looking for

http://forums.cacti.net/about6909.html

Cheers

Jay

_________________
Cacti Version 0.8.7e, Spine 0.8.7e, Apache 2.2.15, Mysql 5.0.88, PHP 5.2.13, RRDTool 1.2.30, NET-SNMP 5.5
Quad Core AMD Opteron Processor 2384, 2.70Ghz, 2GB RAM , 1 CPU used
Windows Server 2003 (X64), VMWARE ESX
Plugins: Aggregate 0.75

SYSTEM STATS: Time:12.5140 Method:spine Processes:2 Threads:15 Hosts:400 HostsPerProcess:200 DataSources:2909 RRDsProcessed:1384


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google Adsense [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group