AMCC / 3Ware RAID Controller & Drive [v1.0 - 2009-03-30]

Templates, scripts for templates, scripts and requests for templates.

Moderators: Moderators, Developers

Post Reply
Author
Message
User avatar
BSOD2600
Cacti Moderator
Posts: 12160
Joined: Sat May 08, 2004 12:44 pm
Location: USA

AMCC / 3Ware RAID Controller & Drive [v1.0 - 2009-03-30]

#1 Post by BSOD2600 » Mon Mar 30, 2009 6:39 pm

AMCC/3ware RAID Controller templates
Created by BSOD2600

*History*
1.0: Initial release

*Requirements*
- AMCC SNMP Addon installed and functional. Manually snmpwalk .1.3.6.1.4.1.1458.100.20.1 to verify.

*Installation*
1. Import the \templates
2. Copy over the \resources\snmp_queries\ scripts
3. Add the AMCC - Controller & AMCC - Drive data queries to a device.
4. Create graphs for the host.


Note: Currently the AMCC SNMP agent only supports reporting OutstandingIO. Eventually, they claim it'll report IOsPerSecond & KiloPerSecond.
Attachments
amcc_sample.png
Sample graphs.
amcc_sample.png (35.7 KiB) Viewed 11636 times
amcc-1.0.zip
scripts/templates
(44.87 KiB) Downloaded 512 times

logik
Posts: 2
Joined: Wed Jun 10, 2009 11:34 am

#2 Post by logik » Wed Jun 10, 2009 11:35 am

has anyone been able to get this working on a debian/ubuntu dist?

User avatar
BSOD2600
Cacti Moderator
Posts: 12160
Joined: Sat May 08, 2004 12:44 pm
Location: USA

#3 Post by BSOD2600 » Wed Jun 10, 2009 12:27 pm

logik wrote:has anyone been able to get this working on a debian/ubuntu dist?
Did you try?

logik
Posts: 2
Joined: Wed Jun 10, 2009 11:34 am

#4 Post by logik » Wed Jun 10, 2009 2:33 pm

yes, converted rpm to deb with alien and installed

Code: Select all

[email protected]:~# snmpwalk -v2c .1.3.6.1.4.1.1458
SNMPv2-SMI::enterprises.1458 = No Such Object available on this agent at this OID
deb added the following line in my snmpd.conf file:

Code: Select all

dlmod amccRaidMIB /usr/lib/amcc9000RaidSnmp/1.00.00.008B/amccRaidMIB.so
it also installed AMCC-RAID-MIB.txt in the mibs directory. as well I exported MIBS=+AMCC-RAID-MIB, i have enabled the 3x_9xxx module.

I have a 9650se

not sure where to go from here

User avatar
BSOD2600
Cacti Moderator
Posts: 12160
Joined: Sat May 08, 2004 12:44 pm
Location: USA

#5 Post by BSOD2600 » Wed Jun 10, 2009 5:34 pm

Either consult the 3ware linux snmp install guide or open a support ticket. Your issues lay with the snmp agent, not this template.

tsunam
Posts: 8
Joined: Tue Feb 28, 2006 11:24 pm

#6 Post by tsunam » Fri Jun 12, 2009 2:46 pm

logik wrote:yes, converted rpm to deb with alien and installed

Code: Select all

[email protected]:~# snmpwalk -v2c .1.3.6.1.4.1.1458
SNMPv2-SMI::enterprises.1458 = No Such Object available on this agent at this OID
deb added the following line in my snmpd.conf file:

Code: Select all

dlmod amccRaidMIB /usr/lib/amcc9000RaidSnmp/1.00.00.008B/amccRaidMIB.so
it also installed AMCC-RAID-MIB.txt in the mibs directory. as well I exported MIBS=+AMCC-RAID-MIB, i have enabled the 3x_9xxx module.

I have a 9650se

not sure where to go from here
Short thing to try:

ldd /usr/lib/amcc9000RaidSnmp/1.00.00.008B/amccRaidMIB.so[

See if you have anything like the following...
libnetsnmpagent.so.10 => not found

That would cause it to fail entirely.

Post Reply